Abstract:<p>Scientific research proposing any type of device/technique for seismic protection of buildings is generally based on numerical models that adopt simplifications to make possible extensive analyses. This means that important details of the inelastic response could be neglected. Following this consideration, regardless of the device/technique invented, before it could be put into practice, an experimental verification of the actual structural performance should be conducted by full‐scale tests at building level. This issue is investigated in the paper considering seismic retrofit of reinforced concrete (RC) framed structures by buckling‐restrained braces (BRBs) as technique to be validated, while hybrid test is selected as tool for experimental validation at building level. The analysed seismic upgrading technique consists in the insertion of BRBs into the RC frame. The upgrading intervention is designed by a method developed in previous studies. This technique responds to an important need of the society. Indeed, existing RC frames showed high vulnerability in occurrence of past earthquakes when they were not originally conceived to sustain horizontal forces. The hybrid test is selected among the available experimental techniques because it allows the experimentation on full‐scale specimens with reasonable cost. In this study, a substructure hybrid test was conducted and the results are here presented to (a) evaluate the effectiveness of the design method of BRBs for seismic upgrading, (b) investigate the integration of BRBs in existing RC frame, and (c) show the potentiality of the substructure hybrid test for the experimental verification of innovative techniques for seismic protection of buildings.</p>

Study on Seismic Design of Transmission Story of SRC -RC Vertical Hybrid Structures

Review of Studies on Seismic Design of Transition Story of Steel Reinforced Concrete(SRC) Vertical Hybrid Structures

Review of studies on seismic design of steel reinforced concrete (SRC) vertical hybrid structures

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Design of Transition Story of Steel Reinforced Concrete (SRC) Vertical Hybrid Structures

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Introduction of design method for RC structures under severe earthquake in Japan

Experimental study and analysis Of the hysteretic behavior of the RC scattered shear wall-SRC frame-bent structures for thermal power plant

Study of Displacement-Based Seismic Design for RC Frame Structures

Experimental study on seismic performance of a new transfer joint in the steel-concrete vertical hybrid structure

Elasto-plastic Time History Analysis of a Vertial Hybrid Structure

Experimental Investigation on Seismic Behavior of Steel Truss-RC Column Hybrid Structure with Steel Diagonal Braces

Preliminary study on seismic design method of RC frame structure under the excitations of two earthquakes

Experimental study on the displacement response of the scattered shear wall - SRC frame-bent hybrid main building structure in thermal power plant under earthquake

Full‐scale hybrid test for realistic verification of a seismic upgrading technique of RC frames by BRBs

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Comparative study of seismic design method for reinforced concrete structures in China and Japan

A Comparative Case Study on Seismic Design of Tall Rc Frame-Core-Tube Structures in China and Usa

Seismic Performance Analysis of High-rise Steel-concrete Composite Structures under Earthquake Action Based on Sound-Vibration Method

Experimental Study on Seismic Behavior of SRC-RC Transfer Columns with Different Constructional Measures