Abstract:In order to evaluate the seismic performance of special-shaped interior joints (SSIJ) and promote the application and development of steel reinforced concrete (SRC) frame-bent structure in nuclear power plant (NPP), eight 1/4 scale SRC SSIJ were designed and manufactured. The seismic performance, failure process, failure modes and bearing capacity of SRC SSIJ were analyzed under low-cycle repeated loading test. A solid finite element model (FEM) was established through ABAQUS, which considered the plastic damage of concrete to simulate the damage evolution of the component during the actual stress process, and verified the correctness of FEM through the experimental. Furthermore, the parametric analyses on seismic behavior of SSIJ were studied, including the dislocation height of SRC beam, axial load ratio and steel content. The seismic behavior of the SRC SSIJ was significantly affected by the steel content, comparing ρc = 3.08%, ρb,left = 3.5% and ρb,right = 3.08% with that steel content augments of ρc = 5.1%, ρb,left = 5.79% andρb,right = 5.18%, the corresponding ultimate load were 180.2 <math>kN</math> (positive) and 179.9 <math>kN</math> (negative), and increased by 28% and 30%, respectively. Ultimately, the economical and effective reinforcement measures were proposed, hoping to provide reference for seismic design of practical engineering application.

Review of studies on seismic design of steel reinforced concrete (SRC) vertical hybrid structures

Review of Studies on Seismic Design of Transition Story of Steel Reinforced Concrete(SRC) Vertical Hybrid Structures

Study on Seismic Design of Transmission Story of SRC -RC Vertical Hybrid Structures

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Design of Transition Story of Steel Reinforced Concrete (SRC) Vertical Hybrid Structures

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Prospect of Core Steel Reinforced Concrete Structures

Seismic Behavior and Modeling of Steel Reinforced Concrete (SRC) Walls

Experimental study on seismic performance of a new transfer joint in the steel-concrete vertical hybrid structure

Seismic Performance Analysis of High-rise Steel-concrete Composite Structures under Earthquake Action Based on Sound-Vibration Method

Introduction of design method for RC structures under severe earthquake in Japan

Study on prestressed steel reinforced concrete structures subjected to bending moment

Seismic resilient steel structures: A review of research, practice, challenges and opportunities

Elasto-plastic Time History Analysis of a Vertial Hybrid Structure

Seismic Performance of Steel-Reinforced Concrete Columns with Q690 High-Strength Steel

Seismic Design and Application of Hybrid Coupled Walls with Replaceable Steel Coupling Beams in High‐rise Buildings

Study on Seismic Design and Section Nonlinear Analysis of Core Steel Reinforced Concrete Column

COMPARISON OF THE SPECIFICATIONS FOR DESIGN OF SRC STRUCTURES

Study on seismic performance of SRC special-shaped interior joints in NPP

Seismic Behavior of Steel Reinforced Ultra-High Strength Concrete Composite Frame: Experimental and Numerical Study