Abstract:The seismic behavior of steel reinforced ultra-high strength concrete (SRUHSC) composite frame was investigated through finite element analysis (FEA) modeling. A FEA model for the seismic analysis of the SRUHSC frame was first established and verified with test results. The numerical model was subsequently used to study the seismic performance of the SRUHSC frame, including the P - Δ skeleton curves, the stiffness degradation, the failure mode, the subsequence mechanisms of plastic hinges and the stress–strain distribution. Finally, a parametric study was carried out to investigate the effect of salient parameters on the behavior of the SRUHSC frame. It was found that with the increment of the concrete strength, yield strength of steel, and linear stiffness ratio of beam to column, the horizontal load-bearing capacity and the elastic stiffness of the structure were improved, but there was no significant effect on the ductility. With the increment of the volume stirrup ratio and structural steel ratio, the horizontal load-bearing capacity and the ductility of the structure were both improved. However, with the increment of the axial-load ratio, there was no obvious change in the elastic stiffness of the structure, but the horizontal load bearing capacity and the ductility of the structure decreased obviously. In addition, the accuracy of a concrete constitutive model in the different degrees of constraint for the SRUHSC frame proposed by the authors was verified with the FEA model.

Review of Studies on Seismic Design of Transition Story of Steel Reinforced Concrete(SRC) Vertical Hybrid Structures

Review of studies on seismic design of steel reinforced concrete (SRC) vertical hybrid structures

Design of Transition Story of Steel Reinforced Concrete (SRC) Vertical Hybrid Structures

Study on Seismic Design of Transmission Story of SRC -RC Vertical Hybrid Structures

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Hybrid moment resisting frame structure with bolted endplate steel beam and reinforced concrete column connections

Experimental study on seismic performance of a new transfer joint in the steel-concrete vertical hybrid structure

Prospect of Core Steel Reinforced Concrete Structures

Elasto-plastic Time History Analysis of a Vertial Hybrid Structure

Seismic Performance Analysis of High-rise Steel-concrete Composite Structures under Earthquake Action Based on Sound-Vibration Method

Evaluation on the Static and Seismic Performance of Steel Reinforced Concrete Composite Columns with High Strength Materials

Experimental Investigation on Seismic Behavior of Steel Truss-RC Column Hybrid Structure with Steel Diagonal Braces

Introduction of design method for RC structures under severe earthquake in Japan

Seismic Design and Application of Hybrid Coupled Walls with Replaceable Steel Coupling Beams in High‐rise Buildings

Seismic resilient steel structures: A review of research, practice, challenges and opportunities

Seismic Behavior of Steel Reinforced Ultra-High Strength Concrete Composite Frame: Experimental and Numerical Study

Study on Seismic Design and Section Nonlinear Analysis of Core Steel Reinforced Concrete Column

Experimental study and analysis Of the hysteretic behavior of the RC scattered shear wall-SRC frame-bent structures for thermal power plant

Experimental Study on Aseismic Performance of a Full-Scale Multi-Story Residential Building of CTSRC Structure