Abstract:This study proposes an improved multi-scale permutation entropy complete ensemble empirical mode decomposition with adaptive noise (MPE-CEEMDAN) method based on adaptive Kalman filter (AKF) and grey wolf optimizer-least squares support vector machine (GWO-LSSVM). By establishing a temperature compensation model, the gyro temperature output signal is optimized and reconstructed, and a gyro output signal is obtained with better accuracy. Firstly, MPE-CEEMDAN is used to decompose the FOG output signal into several intrinsic mode functions (IMFs); then, the IMFs signal is divided into mixed noise, temperature drift, and other noise according to different frequencies. Secondly, the AKF method is used to denoise the mixed noise. Thirdly, in order to denoise the temperature drift, the fiber gyroscope temperature compensation model is established based on GWO-LSSVM, and the signal without temperature drift is obtained. Finally, the processed mixed noise, the processed temperature drift, the processed other noise, and the signal-dominated IMFs are reconstructed to acquire the improved output signal. The experimental results show that, by using the improved method, the output of a fiber optic gyroscope (FOG) ranging from -30 °C to 60 °C decreases, and the temperature drift dramatically declines. The factor of quantization noise (Q) reduces from 6.1269 × 10-3 to 1.0132 × 10-4, the factor of bias instability (B) reduces from 1.53 × 10-2 to 1 × 10-3, and the factor of random walk of angular velocity (N) reduces from 7.8034 × 10-4 to 7.2110 × 10-6. The improved algorithm can be adopted to denoise the output signal of the FOG with higher accuracy.

Rapid and Precise Compensation of Scale Factor in a Fiber-Optic Gyroscope with a Twin-Peaks Source.

Software Compensation for the Coupling Error of a Single-Mode Fiber Coil under Time-Varying Temperature and Magnetic Field

Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

A Software-Compensation Method to Orthogonal Magnetic Field Drift in A Depolarized Fiber-Optic Gyroscope

Theory And Error Compensation Method Based On The Tilt Sensor Adopted In Dynamic Angle Measurement Of The Fiber Optic Gyroscope

One-Dimensional Angle Measurement Error Calibration Technique for Fiber Optic Gyroscope

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Eigen Frequency Measurements of a Fiber Optic Gyroscope Based on a Staircase Waveform with Large Temperature Range.

A Temperature Drift Compensation Method Applied to Fiber Optic Gyroscope North-Seeking

Compensation of Scale Factor Nonlinear Error Introduced by Harmonic Distortion for Open-Loop Fiber Optic Gyroscopes.

Study on Nonlinear Error Calibration of Fiber Optical Gyroscope Scale Factor Based on LSTM

Compensation of Scale Factor Error for Open-loop Fiber Optic Gyroscopes

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Optical Compensation For Compressing Polarization Nonreciprocity Induced Errors In Interferometric Fiber-Optic Gyroscopes

The Temperature Error Modeling and Compensation Method of Fiber Optic Gyroscope Scaling Factor

Closed-Loop Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Temperature Drift Compensation of Fiber Optic Gyroscopes Based on an Improved Method

Polarization self-compensation in a laser-driven interferometric fiber optic gyroscope with high long-term stability

A Novel Closed-Loop Control to Solve Light Source Power Fluctuations in the Fiber-Optic Gyroscope

A Polarization Multiplexing Interferometric Fiber Optic Gyroscope with Faraday Effect and Shupe Effect Compensation