Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

Effect of Ionic Conductors on the Suppression of PTC and Carrier Emission of Semiconductive Composites

Electrical properties of semi-conductive composites with different Li0.5La0.5TiO3 content

The effect of Li(Ni0.9Co0.05Mn0.05)O2 on improving electrical properties of semi-conductive LDPE/EVA/CB composites

Investigation of Electrical and Thermal Properties of Epoxy Resin/Silicon Carbide Whisker Composites for Electronic Packaging Materials

Electrical Resistivity‐temperature Characteristics Enhancement of Insulating Cross‐linked Polyethylene Composites by Incorporating Positive Temperature Coefficient Particles with Different Curie Temperatures

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

The Influence of Positive Temperature Coefficient Material on the DC Electric Field within Epoxy Composites

Regulation of DC Electric Field Distribution Within Insulation Via Positive Temperature Coefficient Material

Effect of graphene modified semi‐conductive shielding layer on space charge accumulation in insulation layer for high‐voltage direct current cable

Effect of magnetic compound electrode on space charge injection and accumulation in LDPE

Effect of sintering condition on microstructure and dielectric properties of BSTN composite ceramics

Effect of Magnetic Particle Size in Semi-conductive Layer on Charge Accumulation within Insulation Layer of HVDC Cable

Synergistic Improved Electrical Resistivity-Temperature Characteristics and DC Breakdown Strength in Insulating XLPE Composites by Incorporating Positive Temperature Coefficient Particles

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite

Investigation on effect of semiconducting screen on space charge behaviour of polypropylene‐based polymers for HVDC cables

Research progress on conduction mechanism and factors influencing the performance of polymeric PTC composites

Effect of heat treatment time on the PTC behavior of wollastonite/CB/CPE composites

Strategies for improving positive temperature effects in conductive polymer composites – a review

The effect of a conductive polyaniline/carbon black composite on the performance of a semiconductive layer

Effect of Semiconductive Layer on Space Charge Accumulation of Polypropylene Blends for DC Cable Insulation

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites