Regulation of DC Electric Field Distribution Within Insulation Via Positive Temperature Coefficient Material

Zhou Wenjun,Teng Chenyuan,Zhou Yuanxiang,Zhang Ling,Zhang Yunxiao

DOI: https://doi.org/10.19595/j.cnki.1000-6753.tces.200381

2021-01-01

Abstract:Negative temperature coefficient(NTC) electrical resistivity of insulating materials causes the distortion of DC electric field, increasing the design difficulty of HVDC equipment. The ceramic(0～35%) with positive temperature coefficient(PTC) electrical resistivity was doped into epoxy resin to weaken its temperature dependence of electrical resistivity(0 ～ 35%). Thermal conductivity, electrical resistivity-temperature characteristics and DC breakdown strength were tested. The electric field and temperature distribution under temperature gradient were simulated. The higher doping of PTC filler has a better electric field distribution. As for epoxy composite with 20% filler, the thermal conductivity increases by 66% and the radial temperature gradient decreases by 55%; the NTC effect weakens and the activation energy decreases by 35%; the maximum distortion of electric field decreases by 58%, while the DC breakdown strength only decreases by 16%. The PTC effect of fillers mitigating the decline of electrical resistivity with temperature coupled with decreased hot-spot temperature suppresses the distortion of electric field. The optimization of electric field distribution within insulation via PTC materials/epoxy composites has potential to be used in HVDC electrical equipment.