Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

Regulation of Temperature Resistivity Characteristics of Insulating Epoxy Composite by Incorporating Positive Temperature Coefficient Material

Optimization of the Temperature-Dependent Electrical Resistivity in Epoxy/Positive Temperature Coefficient Ceramic Nanocomposites

Improved electrical resistivity-temperature characteristics of insulating epoxy composites filled with polydopamine-coated ceramic particles with positive temperature coefficient

The Influence of Positive Temperature Coefficient Material on the DC Electric Field within Epoxy Composites

Regulation of DC Electric Field Distribution Within Insulation Via Positive Temperature Coefficient Material

Improvement of the Electrical Resistivity of Epoxy Resin at Elevated Temperature by Adding a Positive Temperature Coefficient BaTiO3-based Compound

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite

Synergistic effect of positive temperature coefficient and thermally conductive micro‐nano fillers on electrical and thermal properties of epoxy resin

Space charge performance of epoxy composites with improved thermal property at high temperature under high electric field

Electrical Resistivity‐temperature Characteristics Enhancement of Insulating Cross‐linked Polyethylene Composites by Incorporating Positive Temperature Coefficient Particles with Different Curie Temperatures

Conductive polymer composites with positive temperature coefficient

Cyclic thermoresistivity of resin-based carbon fiber bars modified with mixed carbon powder and nano-silica

e temperature coe ffi cient behavior of the high-density polyethylene composites with multi-dimensional carbon fi llers and their use for temperature-sensing resistors †

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Studies on Preparation and Thermal Control Behavior of Hybrid Fillers/binary-Polymer Composites with Positive Temperature Coefficient Characteristic

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

A Novel Polymer Composite with Double Positive‐temperature‐coefficient Transitions: Effect of Filler–matrix Interface on the Resistivity–temperature Behavior

Enhanced positive temperature coefficient behavior of the high-density polyethylene composites with multi-dimensional carbon fillers and their use for temperature-sensing resistors

Research and Application of Polymer-Based PTC Composites

Research progress on conduction mechanism and factors influencing the performance of polymeric PTC composites

A New Polymer Composite Thermistor Having Double PTC Transitions