Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

What problem does this paper attempt to address?

The paper attempts to address the issue of studying the electrical properties and electrothermal behavior of linear low-density polyethylene (LLDPE)-based composites after adding carbon black (CB) or mixed fillers (CB and graphite), particularly the positive temperature coefficient (PTC) effect of these composites. Specifically, the study aims to: 1. **Explore the electrical conductivity and electrothermal properties of LLDPE-based composites**: By adding different concentrations of carbon black and graphite, the study investigates the DC and AC conductivity, dielectric constant, and loss factor of these composites. 2. **Analyze the PTC effect and its mechanism**: Examine the impact of filler concentration on the PTC effect, particularly the curves of resistivity changes with temperature at different filler concentrations, and analyze the relationship between these changes and crystallinity. 3. **Evaluate the self-regulating temperature performance of the composites**: Through temperature-time experiments, verify the self-regulating temperature and current, voltage limiting capabilities of these composites to ensure their safety and reliability in practical applications. 4. **Optimize the composition of the composites**: Determine the optimal range of filler concentration to achieve the best PTC effect and self-regulating temperature performance, providing new perspectives for low-temperature applications. Overall, the paper hopes to provide a theoretical foundation and technical support for the application of LLDPE-based composites in self-regulating temperature and overcurrent protection fields through systematic research.

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

PTC Behavior and its Stability for High Density Polyethylene/Graphite Composites

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Temperature Dependence of Electrical Resistivity for Carbon Black Filled Ultra-High Molecular Weight Polyethylene Composites Prepared by Hot Compaction

e temperature coe ffi cient behavior of the high-density polyethylene composites with multi-dimensional carbon fi llers and their use for temperature-sensing resistors †

Conductive polymer composites with positive temperature coefficient

Positive temperature coefficient characteristic and structure of graphite nanofibers reinforced high density polyethylene/carbon black nanocomposites

The Influence of Mold Pressing Parameters on Ptc of Hdpe/Cb Composites

Enhanced positive temperature coefficient behavior of the high-density polyethylene composites with multi-dimensional carbon fillers and their use for temperature-sensing resistors

Positive Temperature Coefficient and Electrical Conductivity Investigation of Hybrid Nanocomposites Based on High‐Density Polyethylene/Graphene Nanoplatelets/Carbon Black

High Performance Hybrid Carbon Fillers/Binary-Polymer Nanocomposites With Remarkably Enhanced Positive Temperature Coefficient Effect Of Resistance

Investigation Of Microstructure And Conductive Mechanism Of High Density Polyethylene/Carbon Black Particle Composite By Positron Annihilation Lifetime Spectroscopy

High Performance Hybrid Carbon Fillers/binary–polymer Nanocomposites with Remarkably Enhanced Positive Temperature Coefficient Effect of Resistance

Preparation and PTC properties of multilayer graphene/CB/HDPE conductive composites with different cross-linking systems

Acronitrile butadiene styrene/polycaprolactam/nano carbon black composites: Selective percolation, glass transition and temperature dependence of electrical conductivity

Remarkable selective localization of modified nanoscaled carbon black and positive temperature coefficient effect in binary-polymer matrix composites

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite

Effect of heat treatment time on the PTC behavior of wollastonite/CB/CPE composites

Electrical Resistivity‐temperature Characteristics Enhancement of Insulating Cross‐linked Polyethylene Composites by Incorporating Positive Temperature Coefficient Particles with Different Curie Temperatures

LDPE/carbon black conductive composites: Influence of radiation crosslinking on PTC and NTC properties