Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

Effect of heat treatment time on the PTC behavior of wollastonite/CB/CPE composites

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

PTC Behavior and its Stability for High Density Polyethylene/Graphite Composites

Effect of Heat-Treatment on the Properties of Titanate/Ferrite Composite Ceramics

Effect of High Temperature Treatment on Electric Properties of PZT/PVDF Piezoelectric Composites

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Investigation on physicochemical and piezoresistive properties of smart MWCNT/cementitious composite exposed to elevated temperatures

Preparation and PTC properties of multilayer graphene/CB/HDPE conductive composites with different cross-linking systems

Effect of sintering condition on microstructure and dielectric properties of BSTN composite ceramics

Research progress on conduction mechanism and factors influencing the performance of polymeric PTC composites

Optimization of the Temperature-Dependent Electrical Resistivity in Epoxy/Positive Temperature Coefficient Ceramic Nanocomposites

Effect of Heat Treatment on the Microstructure and Properties of Ti3AlC2-Cr2AlC-TiC Composite

Temperature Dependence of Electrical Resistivity for Carbon Black Filled Ultra-High Molecular Weight Polyethylene Composites Prepared by Hot Compaction

Electrical and Piezoresistive Properties of Ultra-High Toughness Cementitious Composite Incorporating Multi-Walled Carbon Nanotubes: Testing, Analyzing, and Phenomenological Modeling

Enhanced positive temperature coefficient behavior of the high-density polyethylene composites with multi-dimensional carbon fillers and their use for temperature-sensing resistors

Strategies for improving positive temperature effects in conductive polymer composites – a review

e temperature coe ffi cient behavior of the high-density polyethylene composites with multi-dimensional carbon fi llers and their use for temperature-sensing resistors †

Studies on Preparation and Thermal Control Behavior of Hybrid Fillers/binary-Polymer Composites with Positive Temperature Coefficient Characteristic

The connectivity of a ceramic component and its effect on dielectric and thermal properties in low-temperature processed Li 2 MoO 4 - polytetrafluorethylene composites