Abstract:With a melting temperature of up to ~433K, high breakdown strength, and environmental friendliness, polypro-pylene (PP) has the potential to replace crosslinked polyethylene (XLPE) as a novel generation of high voltage direct current (HVDC) cable insulation material. According to the differences in polymer structure, PP can be divided into homo- polypropylene (PPH), polypropylene block copolymer (PPB) and polypropylene random copolymer (PPR). However, the virgin PP cannot be directly used as a cable material due to its high rigidity and brittleness at low temperatures. Blending with polyolefin elastomers (POE) is an effective method to improve the mechanical properties of polymers. Space charge behavior is the main concern in the development and application of HVDC cable insulation materials. Doping with nanoparticles can reduce the space charge accumulation and improve the electrical performance of HVDC cable insulation to a certain extent. Previous studies have mainly focused on the properties of the virgin PPs or the modification of PPH, while the properties of the modified PPB or PPR, especially the electrical properties, have not received enough attention. In this paper, PPB/POE/Si02 and PPR/POE/Si02 nanocomposites were prepared by the melt blending. Space charge behavior, breakdown strength and conduction current of PP nanocomposites above were investigated. It was found that the charge injected from electrode into PP copoly-mer/POE/Si02 nanocomposites is little, and the space charge ac-cumulation is not evident. They have excellent space charge char-acteristics. Their average breakdown field strength is slightly lower than that of PPH/POE/Si02 nanocomposites, but the breakdown strength distribution is more concentrated. With elec-trical aging threshold of higher than 15 kV /mm, they meet the requirements of HVDC cables. When the field strength is greater than 25 kV/mm, PPR nanocomposite, with the lowest conduction current, is suitable for operating under higher electric field. PPR nanocomposite is more suitable for recyclable cable insulation application than PPB nanocomposites.

Effect of Semiconductive Layer on Space Charge Accumulation of Polypropylene Blends for DC Cable Insulation

Space Charge Suppression of Polyethylene Induced by Blending with Ethylene-Butyl Acrylate Copolymer

Electrical properties of MAH-g-PP modified PP/SEBS matrix semi-conductive composite materials

Performance comparison of semi‐conductive shielding layer for high‐voltage cable based on polypropylene and low density polyethylene resin

Electrical Properties of Polypropylene Copolymer/Polyolefin Elastomer/SiO2 Nanocomposites

Investigation on effect of semiconducting screen on space charge behaviour of polypropylene‐based polymers for HVDC cables

Space Charge Behavior in LDPE/EBA Insulation Materials for HVDC Cables

Influence of Three-dimensional Boron Nitride Foam on Thermal Conductivity and Charge Transport Behavior for Polypropylene/Elastomer Blends

Characterization of Polypropylene Modified by Blending Elastomer and Nano-Silica

Comparison of Effects of Ethylene-Based and Propylene-Based Copolymer on Tailoring the Properties of Polypropylene

Structure-performance relationship of polypropylene/elastomer/carbon black composites as high voltage cable shielding layer

Effect of Multi-Dimensional Zinc Oxide on Electrical Properties of Polypropylene Nanocomposites for HVDC Cables

Large Improvement in Trap Level and Space Charge Distribution of Polypropylene by Enhancing the Crystalline − Amorphous Interface Effect in Blends

Improved Insulation Properties of Polypropylenes in HVDC Cables Using Aqueous Suspension Grafting

Electrical conduction properties of PP-based nanocomposite with high thermal conductivity for HVDC cable insulation

Block polypropylene/styrene-ethylene-butylene-styrene tri-block copolymer blends for recyclable HVDC cable insulation

Improvement of space charge suppression of polypropylene for potential application in HVDC cables

Effect of graphene modified semi‐conductive shielding layer on space charge accumulation in insulation layer for high‐voltage direct current cable

Effect of magnetic compound electrode on space charge injection and accumulation in LDPE

Study on space charge and electrical conductivity of polypropylene insulation material

Influence Of Charge Emission Behaviors Of Semi-Conductive Shielding Layer On Charge Accumulation Properties Of Insulation Layer For Hvdc Cable