Abstract:The high processing cost, poor mechanical properties and moderate performance of Bi2Te3–based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce Bi2Te3-Cu2-xTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure Bi2Te3 nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of Cu2-xTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference Bi2Te3 nanomaterial, which is already very low. However, the introduction of Cu2-xTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that Cu2-xTe nanostructures, with a relatively low electron affinity, are able to inject electrons into Bi2Te3, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within Bi2Te3 domains associated with the accumulation of electrons in regions nearby a Cu2-xTe/Bi2Te3 heterojunction. Overall, with the incorporation of a proper amount of Cu2-xTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of Bi2Te3.

Semi-transparent thermo-electric cells based on bismuth telluride and its composites with CNTs and graphene

Flexible Thermoelectric Films Based on Bi2Te3 Nanosheets and Carbon Nanotube Network with High n-Type Performance

Flexible Thermoelectric Films Based on Bi 2 Te 3 Nanowires and Boron Nitride Nanotube Networks with Carbon Doping

Graphitic carbon nitride-bismuth antimony telluride nanocomposites: A potential material for thermoelectric applications

Enhanced Thermoelectric Performance of Bi2Te3 Based Graphene Nanocomposites

A novel and stable way for energy harvesting from Bi2Te3Se alloy based semitransparent photo-thermoelectric module

Benzothienobenzothiophene‐Based Organic Charge Transfer Complex and Carbon Nanotube Composites for p‐Type and n‐Type Thermoelectric Materials and Generators

Thermoelectric properties of a vertically aligned carbon nanotube array with embedded bismuth telluride

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

Enhanced power factor and thermoelectric performance for n-type Bi2Te2.7Se0.3 based composites incorporated with 3D topological insulator nanoinclusions

Achieving High Thermoelectric Performance Through Constructing Coherent Interfaces and Building Interface Potential Barriers in N-Type Bi2Te3/Bi2Te2.7Se0.3 Nanocomposites

A solar thermoelectric conversion material based on BiTe and carbon nanotube composites

High thermoelectric and mechanical performance in strong-textured n-type Bi2Te2.7Se0.3 by temperature gradient method

N-Type Nanocomposite Films Combining SWCNTs, Bi2Te3 Nanoplates, and Cationic Surfactant for Pn-Junction Thermoelectric Generators with Self-Generated Temperature Gradient Under Uniform Sunlight Irradiation

Fine-Tuning Bi2Te3-Copper Selenide Alloys Enables an Efficient n-Type Thermoelectric Conversion

Enhanced thermoelectric efficiency in nanocrystalline bismuth telluride nanotubes.

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Cellulose Fiber-Based Hierarchical Porous Bismuth Telluride for High-Performance Flexible and Tailorable Thermoelectrics.