Abstract:Thermoelectric has long been recognized as a promising technology due to its ability to harvest waste heat from different sources, such as the Sunlight, vehicles, and energy-intensive industries, and thereby convert it into electricity without emitting greenhouse gases, so providing distributed solutions for sustainable energy challenges and energy efficiency issues worldwide. Lead Telluride (PbTe) is the classic thermoelectric material; however, its applications are limited by its low efficiency. The goal of the present research is to improve the energy conversion efficiency of PbTe by mixing single-walled carbon nanotubes (SWCNTs) via simple powder processing and utilizing nanostructuring and quantum confinement effects in a synergistic way. PbTe based composites incorporating different vol% of SWCNTs were fabricated through the high-frequency induction heating furnace at ~450°C. Thermoelectric characteristics of bulk samples were tested at temperatures ranging from ~300 to ~530K. With the inclusion of nanotubes, the electrical conductivity behaviour changes from semi-metallic in pristine PbTe to semi-conducting in composites. This shows that the semiconducting nature of SWCNTs plays a major role in electrical transport. As a result, the composites’ effective electrical conductivities were lowered near room temperature, with the lowest values observed at 0.5 vol% of SWCNTs. When compared to pure PbTe, the Seebeck coefficient of the 0.5 vol% of PbTe composite improves at ambient temperature and gradually drops after ~375K. Thermal conductivity of all the composites reduces and substantial reduction was observed at 0.5 vol% of SWCNTs. The large transition from semi-metallic to semi-conducting transport in pristine PbTe to composites, as well as enhanced short-range carrier scattering, are responsible for lowering electrical conductivity and hence composites’ power factor. As a result, the significant reduction in thermal conductivities could not compensate for the loss of power factor, resulting in lower ZT values from pristine PbTe.

A solar thermoelectric conversion material based on BiTe and carbon nanotube composites

A demo solar thermoelectric conversion device based on Bi 2 Te 3 and carbon nanotubes

Achieving High Thermoelectric Performance Through Constructing Coherent Interfaces and Building Interface Potential Barriers in N-Type Bi2Te3/Bi2Te2.7Se0.3 Nanocomposites

Thermoelectric properties of a vertically aligned carbon nanotube array with embedded bismuth telluride

Thermoelectric Properties of PbTe Based Single-Walled Carbon Nanotube (SWCNT) Composites

Flexible Thermoelectric Films Based on Bi 2 Te 3 Nanowires and Boron Nitride Nanotube Networks with Carbon Doping

A Promising Approach to Enhanced Thermoelectric Properties Using Carbon Nanotube Networks

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

Novel thermoelectric Bi2Te3 nanotubes and nanocapsules prepared by hydrothermal synthesis

Decoupling phonon and carrier scattering at carbon nanotube/Bi2Te3 interfaces for improved thermoelectric performance

Benzothienobenzothiophene‐Based Organic Charge Transfer Complex and Carbon Nanotube Composites for p‐Type and n‐Type Thermoelectric Materials and Generators

Bi2Te3/Carbon Nanotube Hybrid Nanomaterials as Catalysts for Thermoelectric Hydrogen Peroxide Generation

Practical High-Performance (Bi,Sb) 2 Te 3 -Based Thermoelectric Nanocomposites Fabricated by Nanoparticle Mixing and Scrap Recycling.

Enhanced Thermoelectric Performance of Bi2Te3 Through Uniform Dispersion of Single Wall Carbon Nanotubes

Carbon Nanotube-Based Organic Thermoelectric Materials for Energy Harvesting

Achieving High Thermoelectric Performance by Introducing 3D Atomically Thin Conductive Framework in Porous Bi2Te2.7Se0.3‐Carbon Nanotube Hybrids

Bismuth Sulfide Strongly Coupled to Functionalized MWNTs Hybrids with Improved Thermoelectric Properties

Flexible Thermoelectric Films Based on Bi2Te3 Nanosheets and Carbon Nanotube Network with High n-Type Performance

Carbon Nanotubes Grown on the Carbon Fibers to Enhance the Photothermal Conversion toward Solar-Driven Applications

High thermoelectric performance of flexible nanocomposite films based on Bi2Te3 nanoplates and carbon nanotubes selected using ultracentrifugation

Synergistic optimization of thermoelectric performance in cementitious composites by lithium carbonate and carbon nanotubes