Abstract:In the gas metal arc welding (GMAW) process, metal transfer dynamics, influenced by wire material properties such as electrical conductivity and surface tension, serve as key sources of mass and heat for metal deposition on substrates. To elucidate the role of these material properties on metal transfer dynamics from a driving force perspective, this study examined molten droplet elongation across five distinct wires: Al, Cu, Fe, Ni, and Ti. Additionally, a unique non-transferred arc welding setup equipped with a consumable wire anode and two tungsten cathodes was introduced, allowing for observations at minimized arc lengths and preventing current concentration in molten droplets. For Al and Cu wires, while only projected-spray transfer was observed under sufficient arc length conditions, a shift to minimized arc length resulted in significant droplet elongation and a transition to streaming-spray transfer. This contrast emphasized the impact of high electrical conductivity in reducing the internal gradient of electromagnetic pressure and inhibiting the occurrence of streaming-spray transfer. Further substantiating this mechanism, Fe, Ni, and Ti wires revealed that higher electrical conductivity corresponded to an increased transition current to streaming-spray transfer. Additionally, surface tension played a crucial role in the formation of molten droplets and ensured transfer stability, with its influence varying at different current levels. These insights contribute to our comprehensive understanding of arc plasma and molten metal interactions. Our study proposes material-specific strategies to optimize metal transfer dynamics, leading to enhanced control over weld bead formation and overall mechanical properties of welded joints in the GMAW.

The Decoupling Behavior of Arc Coupling and Rotating in Seven-Wire Rotating Arc EGW

Droplet formation and motion characteristics in seven-wire rotating arc electrogas welding

A Theoretical Model of Arc Light Radiation Based on GTA Spectral Diagnosis

Visualization of arc plasma and molten wire behavior in CO2 arc welding process by three-dimensional numerical simulation

Temperature Field and Flow Field of Molten Pool in SRA EGW

Research on suppression of cross coupled arc oscillation behavior

3D Numerical Investigation of a Free-Burning Argon Arc with Metal Electrodes Using a Novel Sheath Coupling Procedure

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Welding Currents Filtering of Compulsively Short Circuiting Transfer in Rotational Arc MAG Welding

Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Research on dynamic characteristics of arc under electrode relative motion

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Role of material properties on metal transfer dynamics in gas metal arc welding

Effect of polarities and shielding gases in CWW GMAW

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Multi-objective Optimization of Short-Circuit Gas Metal Arc Welding for Overhang Structures by Grey Relational Analysis Integrated Taguchi Method

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

Rotating Gliding Arc Codriven By Magnetic Field And Tangential Flow

Stirring effect of the rotating arc on the molten pool during non-axisymmetric tungsten NG-GTAW