Abstract:Multi-gigahertz fundamental repetition rate, tunable repetition rate and wavelength, ultrafast fiber lasers at wavelengths of 1.0, 1.5, and 2.0 µm are experimentally demonstrated and summarized. At the wavelength of 1.0 µm, the laser wavelength is tuned in the range of 1040.1-1042.9 nm and the repetition rate is shifted by 226 kHz in a 3-cm-long all-fiber laser by controlling the temperature of the resonator. Compared with a previous work where the maximum average power was 0.8 mW, the power in this study is significantly improved to 57 mW under a launched pump power of 213 mW, thus achieving an optical-to-optical efficiency of 27%. For comparison, a similar temperature-tuning technique is implemented in a Tm3+-doped ultrafast oscillator but, as expected, it results in a broader tunable range of 14.1 nm (1974.1-1988.2 nm) in wavelength as compared with the value of 1.8 nm for the wavelength of 1.0 µm. The repetition rate in the process is shifted by 294 kHz. For the high-frequency range from 100 kHz to 10 MHz, the value of integrated timing jitter gradually increases with an increase in temperature. Finally, to the best of our knowledge, for the first time, a new method for tuning wavelength and repetition rate is proposed and demonstrated for a femtosecond fiber laser at the wavelength of 1.5 µm. Through fine rotation of the alignment angle between the Er/Yb:glass fiber and a semiconductor saturable absorption mirror, the peak wavelength can be tuned in the range of 1591.4-1586.1 nm and the repetition rate is shifted by 60 kHz.

>100 W GHz Femtosecond Burst Mode All-Fiber Laser System at 1.0 Μm.

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

1200-W all polarization-maintaining fiber GHz-femtosecond-pulse laser with good beam quality

All-fiber GHz few-cycle pulse generation at 2 µm

High-repetition-rate Ultrafast Fiber Lasers.

Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

165 MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8 µm

All-fiber Mode-Locked Gigahertz Femtosecond Laser at 1610 Nm Using a Self-Developed Long-Wavelength Gain Fiber

97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Hundred Watt Level and High Energy Compact Hybrid Fiber Femtosecond Laser with Good Beam Quality

3 GHz, Fundamentally Mode-Locked, Femtosecond Yb-fiber Laser.

1 GHz Repetition Rate Ring Cavity Femtosecond Yb:fiber Laser

3-Ghz, Ultrafast Yb-fiber Laser Sources: Closing the Spectral Gaps

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

GHz fundamental repetition rate femtosecond Er:fiber laser mode locked by nonlinear polarization evolution

1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser