Abstract:Galena is a natural mineral enriched with lead sulfide (PbS). It typically forms in hydrothermal veins associated with igneous rocks and can also occur as a gangue mineral in other ore deposits. PbS is of special importance for scientific research applications due to the possibility of tuning its semiconductor energy gap using nanotechnology in conjunction with powder metallurgy as an easy, controllable production route. In this paper, almost pure PbS was successfully produced starting from a high ratio of PbS phase galena ore. As-received galena lumps were roughly pulverized and milled to produce four particle size ranges of 38, 63, 125, and 250 μm prior to compaction and sintering in a vacuum (pre-flushed with argon gas). SEM coupled with the EDAX analysis unit was employed to investigate the microstructure and chemical composition of the as-received galena and the subsequent products after sintering. The chemical analysis confirmed the high ratio of PbS compound in the as-received galena and sintered products with approximately 85% Pb and 13% S mass ratio. The sintering process of the galena powder was carried out at different values of temperature, time, and compaction pressure. Additionally, the effect of length to diameter ratio of compacted and sintered samples was investigated. XRD analysis confirmed the existence of the PbS phase in the as-received and sintered samples at 700 °C with approximately 98 wt.%, as well as a new phase that is formed at 800 °C with a lower percentage. The micro-hardness of the as-received and sintered samples was measured and compared with the as-received galena ore. The results showed a significant reduction in the hardness of sintered galena powder compared with the bulk as-received galena by 52%. Furthermore, a relative sintered density of 99.3% for the as-received galena density signifies a novel result using powder metallurgy techniques.

Gallium-Based Metallic Pastes: Preparation from Powder Mixture by In Situ Synthesis of Liquid Component

A general approach to composites containing nonmetallic fillers and liquid gallium

Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (transm2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties

Core‐Shelled Nanoparticle Fillers for Recoverable Magnetic Liquid Metal with High Stability

Paste-based 3D printing of metallic materials: effect of binders and precursor sizes

Liquid Metal Hydrothermal Rheological Modification Method for High Performance Gallium‐Coated Carbon Microparticle Composites

Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles

Fast Solidification of Pure Gallium at Room Temperature and Its Micromechanical Properties

Fabrication Of A Hybrid Paste Consisting Of Microscale Ag-Plated Cu Flakes And Nanoscale Ag Particles And Characterization Of Low-Temperature Sintered Hybrid Paste Joints

Gallium Liquid Metal: The Devil's Elixir

Aluminum Solder Paste and Its Application

A powder-based approach to semisolid processing of metals for fabrication of die-castings and composites

Preparation and Sintering Properties of Ag27Cu2Sn Nanopaste As Die Attach Material

Synthesis with Glucose Reduction Method and Low Temperature Sintering of Ag-Cu Alloy Nanoparticle Pastes for Electronic Packaging

Gallium‐Based Liquid Metal Composites with Enhanced Thermal and Electrical Performance Enabled by Structural Engineering of Filler

Particle-based Porous Materials for the Rapid and Spontaneous Diffusion of Liquid Metals.

Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics

A Universal Mechanochemistry Allows On‐Demand Synthesis of Stable and Processable Liquid Metal Composites

Effect of Particle Morphology and Added Gallium on Reactivity of Aluminum Powders

Study of Galena Ore Powder Sintering and Its Microstructure