Abstract:Due to the increasing demand for high-power density of electronic devices, the technological enhancement of thermal interface materials (TIMs) is of crucial importance for further advancement of the issue of thermal management. Graphene displayed a huge possibility for the advancement of thermal interface materials because of its extreme, high thermal conductivity. Modest quantities of 2D (two-dimensional) graphene sheets are typically mixed into a polymer matrix to manufacture the nanocomposites with enhanced functional or mechanical properties. A simplistic and useful method to bond a few-layer graphite (AFLG) and AgNWs with polydimethylsiloxane (PDMS), print on the high thermal conductivity three-dimensional (3D) structure fiber with different ratios of Cu powder, the corresponding composite with the improvement of thermal conductivity is made. The thermal conductivity of composites with 20 wt% AFLG and AgNWs at 2.0 mg/mL displays an increase when the Cu particles loading of 2.5 to 7.5 wt% adding. The effect is attributed to the intercalation of spherical copper particles between other fillers that come out of the formation of the percolation network with high thermal conductivity. Thermal conductivity of through-plane (KZ) 5.96 W/mK and in-plane (Kx) 41.7 W/mK are achieved in composites with 7.5 wt% copper particle loading. Consequently, the process in this study endows these nanocomposites with high thermal conductivity. Besides, the proposed nanostructure-tailored nanocomposites are promising for surface variations with time during heating and cooling. The results brightly show the interaction between the Cu particles and above fillers in the nanocomposites and demonstrate the potential of the hybrid nanocomposites in the field of TIMs for practical applications. The novelty and contribution of this study integrate the comprehensive benefits of AgNWs, Cu, and PDMS that lie in the low-cost fabrication method via the interconnection of 1D/2D/3D nanostructures based on hybrid supported fillers for enhanced thermal interface to fabricated thermal interface materials with new architectures. The ball-milled-structured Cu powder is added to 2D-structured AFLG and enhanced the in-plane thermal conductivity by about 2 times. The through-plane thermal conductivity was enhanced by about 1.18 times. The multiple fillers structure not only brings the process easier to achieve but is also environmentally friendly in the era of a highly polluted world.

Gallium‐Based Liquid Metal Composites with Enhanced Thermal and Electrical Performance Enabled by Structural Engineering of Filler

Experimental Investigation on Optimization of the Performance of Gallium-Based Liquid Metal with High Thermal Conductivity As Thermal Interface Material for Efficient Electronic Cooling

Magnetically Responsive Gallium-Based Liquid Metal: Preparation, Property and Application.

Construction of 3D Conductive Network in Liquid Gallium with Enhanced Thermal and Electrical Performance

Liquid Metal Hydrothermal Rheological Modification Method for High Performance Gallium‐Coated Carbon Microparticle Composites

Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (transm2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties

On the effective thermal conductivity of gallium-based liquid metal filled elastomers

Improving the thermal, mechanical, and insulating characteristics of thermal interface materials with liquid metal-based diphase structure

Bioinspired Functional Composites for Enhanced Thermally Conductivity via Fractal-Growth CuNP Fillers

Liquid metal-based elastomer heat conduction enhancement enabled by stretching

Self-Assembled Copper Film-Enabled Liquid Metal Core–Shell Composite

Fabrication of copper powder hybrid supported fillers with interconnected 1D/2D/3D nanostructures for enhanced thermal interface materials properties

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

A general approach to composites containing nonmetallic fillers and liquid gallium

Effect of liquid metal enhanced Cu Nano/Micro particle paste on performance of Cu-Cu joints

Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles

A Universal Mechanochemistry Allows On‐Demand Synthesis of Stable and Processable Liquid Metal Composites

Fabrication of liquid metal/diamond hybrid thermal interface materials with high thermal conductivity and low flowability

Ionic Liquid-Modified Copper for the Enhanced Thermal Conductivity and Mechanical Properties of Epoxy Resin/Expanded Graphite Composites

High thermal conductivity in diamond induced carbon fiber-liquid metal mixtures