Abstract:Metal nanowires (NWs) have shown superior advances for the next-generation transparent conducting (TC) materials. Most concerns were focused on uniform conductive films; however, fabrication of a programmed circuit is still lacking. Here, we demonstrate a programmable ultrafast welding method by pulsed laser beam scanning under ambient conditions to achieve a Cu NW pattern-free TC circuit as well as various size films. High-aspect ratio Cu NWs (> 3000) are synthesized through an oleylamine-mediated solution system. Pulsed ultraviolet laser irradiation together with a programmed moving station is set up for the welding of Cu NW networks. Finite element simulations reveal that the transient heating by efficient absorption of UV light (∼ 250 nm) could remove the organic residues on the surface and realize local welding of interlaced NW junctions. With only 10 ms pulsed irradiation, high optoelectronic performance (33 ohm/sq. at 87% transmittance at 550 nm) and excellent stability of the Cu NW TC film have been achieved. The line-by-line and selected route scanning modes could rapidly make large area TC films and directly write flexible circuits. Moreover, completely transparent micron-size UV and blue LED chips are fabricated and successfully lit with bright emission. This method opens up a future way of circuit and device fabrication by direct one-step laser writing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07962?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07962</a>.Schematics of growth mechanism of Cu NWs; synthesis and characterizations of superfine Cu NWs; SEM images, SAED pattern, EDS spectrum, XPS spectrum, and TEM image; line-by-line scanning routes; UV–vis transmission spectrum; I–V curves measured after1 and 100 cycles; and structure and EL spectrum of the blue LED chip (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07962/suppl_file/am0c07962_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Femtosecond Laser Direct Writing of Copper Microelectrodes

Fabrication of Flexible Copper Microelectrodes Using Laser Direct Writing for Sensing Applications

One-step Selective Laser Patterning of Copper/graphene Flexible Electrodes

Direct laser writing of copper and copper oxide structures on plastic substrates for memristor devices

Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles.

Experiment Study of Laser Thermal Enhanced Electrochemical Deposition

Wavelength-influenced electrical performance of laser-written flexible copper-based structures

Cu Electrode Fabrication by Acid-assisted Laser Processing of Cu Nanoparticles and Application with Transparent·Flexible Electrode

Laser Writing of Cu–Ag Alloy Flexible Electrodes with Excellent Oxidation and Electrochemical Migration Resistances

Cluster-enabled Patterning of Copper Nanostructures from Aqueous Solution Using a Femtosecond Laser

Microplasma Direct Writing of a Copper Thin Film in the Atmospheric Condition with a Novel Copper Powder Electrode

Flexible and Transparent Cu Electronics by Low‐Temperature Acid‐Assisted Laser Processing of Cu Nanoparticles

Laser-Assisted Photo-Thermal Reaction for Ultrafast Synthesis of Single-Walled Carbon Nanotube/Copper Nanoparticles Hybrid Films as Flexible Electrodes

Programmed Ultrafast Scan Welding of Cu Nanowire Networks with a Pulsed Ultraviolet Laser Beam for Transparent Conductive Electrodes and Flexible Circuits

Fabrication of adhesion-enhanced and highly reliable copper circuits onto flexible substrates via a scribing–seeding–plating process

Flexible Metal Electrodes by Femtosecond Laser-Activated Deposition for Human–Machine Interfaces

Flexible nanowiring of metal on nonplanar substrates by femtosecond-laser-induced electroless plating.

Localized electrodeposition micro additive manufacturing of pure copper microstructures

High‐Efficiency and Low‐Intensity Threshold Femtosecond Laser Direct Writing of Precise Metallic Micropatterns on Transparent Substrate

Facile preparation of patterned silver electrodes with high conductivity, flatness and adjustable work function by laser direct writing followed by transfer process

Laser-induced localized and maskless electrodeposition of micro-copper structure on silicon surface: Simulation and experimental study