Abstract:Metal nanowires (NWs) have shown superior advances for the next-generation transparent conducting (TC) materials. Most concerns were focused on uniform conductive films; however, fabrication of a programmed circuit is still lacking. Here, we demonstrate a programmable ultrafast welding method by pulsed laser beam scanning under ambient conditions to achieve a Cu NW pattern-free TC circuit as well as various size films. High-aspect ratio Cu NWs (> 3000) are synthesized through an oleylamine-mediated solution system. Pulsed ultraviolet laser irradiation together with a programmed moving station is set up for the welding of Cu NW networks. Finite element simulations reveal that the transient heating by efficient absorption of UV light (∼ 250 nm) could remove the organic residues on the surface and realize local welding of interlaced NW junctions. With only 10 ms pulsed irradiation, high optoelectronic performance (33 ohm/sq. at 87% transmittance at 550 nm) and excellent stability of the Cu NW TC film have been achieved. The line-by-line and selected route scanning modes could rapidly make large area TC films and directly write flexible circuits. Moreover, completely transparent micron-size UV and blue LED chips are fabricated and successfully lit with bright emission. This method opens up a future way of circuit and device fabrication by direct one-step laser writing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07962?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07962</a>.Schematics of growth mechanism of Cu NWs; synthesis and characterizations of superfine Cu NWs; SEM images, SAED pattern, EDS spectrum, XPS spectrum, and TEM image; line-by-line scanning routes; UV–vis transmission spectrum; I–V curves measured after1 and 100 cycles; and structure and EL spectrum of the blue LED chip (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07962/suppl_file/am0c07962_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cu Electrode Fabrication by Acid-assisted Laser Processing of Cu Nanoparticles and Application with Transparent·Flexible Electrode

Flexible and Transparent Cu Electronics by Low‐Temperature Acid‐Assisted Laser Processing of Cu Nanoparticles

Site-selective Fabrication of Patterned Transparent Copper Mesh on Flexible Substrates at Mild Temperature for Green, Low Cost Electronics

Laser-Assisted Photo-Thermal Reaction for Ultrafast Synthesis of Single-Walled Carbon Nanotube/Copper Nanoparticles Hybrid Films as Flexible Electrodes

Fabrication of Flexible Copper Microelectrodes Using Laser Direct Writing for Sensing Applications

Laser Writing of Cu–Ag Alloy Flexible Electrodes with Excellent Oxidation and Electrochemical Migration Resistances

Flexible Metal Electrodes by Femtosecond Laser-Activated Deposition for Human–Machine Interfaces

Self-sintering liquid metal ink with LAPONITE? for flexible electronics

Laser-Induced Selective Metallization on Polymer Substrates Using Organocopper for Portable Electronics

Fabrication of Cu Micromembrane as a Flexible Electrode

Programmed Ultrafast Scan Welding of Cu Nanowire Networks with a Pulsed Ultraviolet Laser Beam for Transparent Conductive Electrodes and Flexible Circuits

Ingenious Method for Rapid Fabrication of a Highly Conductive Hybrid Film of Printed Cu Nanoparticle Layers Plated by Ag Nanoplates on a PET Substrate at Room Temperature

Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles.

Area-Selective Lift-Off Mechanism Based on Dual-Triggered Interfacial Adhesion Switching: Highly Facile Fabrication of Flexible Nanomesh Electrode

Directly Electroplated Metallization on Flexible Substrates Based on Silver Nanowire Conductive Composite for Wearable Electronics

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Passivation coating on electrospun copper nanofibers for stable transparent electrodes.

Simultaneous laser sintering and embedding of silver nanoparticles for highly flexible embedded electrodes

Epoxy Resin-Assisted Cu Catalytic Printing for Flexible Cu Conductors on Smooth and Rough Substrates

Direct laser writing of copper and copper oxide structures on plastic substrates for memristor devices

High aspect ratio copper nanowires and copper nanoparticles decorated by reduced graphene oxide for flexible transparent conductive electrodes