Abstract:In recent years, selective metallization on polymer surfaces has attracted considerable attention due to its excellent properties and wide applications. This paper reports that copper phosphate (Cu3(PO4)2) or nickel phosphate (Ni3(PO4)2) was selected as laser-active material to successfully fabricate metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were utilized to characterize the interaction mechanism between a nanosecond-pulsed laser (355 and 1064 nm wavelengths) and Cu3(PO4)2 or Ni3(PO4)2. It was found that after 355 or 1064 nm laser activation with appropriate parameters, Cu+ was generated from Cu3(PO4)2, and NiO was generated from Ni3(PO4)2. At the same time, Cu+ or NiO adsorbed on the porous sponge-like microstructure of modified polycarbonate (PC), respectively, and acted as catalytic active centers to realize selective copper deposition in the laser-activated zone. Furthermore, the obtained copper layers were confirmed to possess good selectivity, electrical conductivity, and high adhesion strength (the highest grade of 5B). Moreover, from comparisons of Cu3(PO4)2 with Ni3(PO4)2 and of 355 nm laser activation with 1064 nm laser activation, the 1064 nm laser activation of Cu3(PO4)2 produced the most catalytic seeds (Cu+) and had the best catalytic effect.

Laser-Induced Selective Metallization on Polymer Substrates Using Organocopper for Portable Electronics

Selective Metallization of Thermoplastic Elastomers Based on Laser‐Induced Surface Activation

Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating

Preparation of Electroless Copper Circuit on Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) Using a Laser curing of Pd complex

Selective Metallization on Ordinary Polymer Substrates by Laser Direct Activation of Copper Phosphate or Nickel Phosphate

Laser Direct Activation of Polyimide for Selective Electroless Plating of Flexible Conductive Patterns

Laser‐Activated Selective Electroless Plating on 3D Structures via Additive Manufacturing for Customized Electronics

Electroless Deposition of Confined Copper Layers Based on Selective Activation by Pulsed Laser Irradiation

Additive and Photochemical Manufacturing of Copper

Glass Fiber Reinforced Polycarbonate Composites for Laser Direct Structuring and Electroless Copper Plating

Modification of Polymeric Surfaces with Ultrashort Laser Pulses for the Selective Deposition of Homogeneous Metallic Conductive Layers

An In-Situ Hybrid Laser-Induced Integrated Sensor System with Antioxidative Copper

Research on laser-assisted selective metallization of a 3D printed ceramic surface

Selective metallization of piezoelectric ceramics by laser-induced surface modification combined with electroless copper plating

Direct laser writing of copper and copper oxide structures on plastic substrates for memristor devices

Selective metallization on additive manufactured polymer for fabrication of integrated device

Flexible and Transparent Cu Electronics by Low‐Temperature Acid‐Assisted Laser Processing of Cu Nanoparticles

Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles.

Self-sintering liquid metal ink with LAPONITE? for flexible electronics

Selective Metallization of Polymers: Surface Activation of Polybutylene Terephthalate (PBT) Assisted by Picosecond Laser Pulses

Cu Electrode Fabrication by Acid-assisted Laser Processing of Cu Nanoparticles and Application with Transparent·Flexible Electrode