Abstract:(1-x)(Na₀.₅Bi₀.₅)TiO₃-xCaTiO₃ Lead-free piezoelectric systems, positioned near the morphotropic phase boundary, were synthesized for varying compositions (x = 0.0, 0.05, 0.10, 0.15, and 0.20) using the solid-state reaction route. This study delves into the comprehensive investigation of the compositional effects on phase, structure, and electrical characteristics. Specifically, a morphotropic phase boundary (MPB) involving rhombohedral (R3c) and orthorhombic (Pnma) structures was seen in a (1-x)NBT-xCT crystal structure close to the composition of x = 0.10. Information on the pure phase formation and grain size of the intended composite system has been obtained using Rietveld refinement of the X-ray diffraction (XRD) diagram as well as scanning electron microscopy (SEM). The impact of the CT phase on the NBT lattice was investigated through an analysis of the charge density distribution. Using Williamson-Hall plots from XRD data, the average particle diameter was estimated to be between 131.87 nm and 136.54 nm. The relative permittivity increases with the addition of Ca2+, according to dielectric measurements. All ceramics exhibit a diffuse phase transition near (Tm) with a diffusivity range of 1.5-1.8, and a downward shift in depolarization temperature (Td). At the morphotropic phase boundary (MPB), excellent dielectric properties were observed at x = 0.10, which are attributed to the presence of both rhombohedral and orthorhombic structures as well as an appropriate particle size. The conduction process at different temperatures is thermally activated, as determined by the frequency-dependent ac conductivity.

Morphology Evolution of BaTi5O11 Nanocrystals Prepared by Hydrothermal Method and Their Permittivity

Preparation of Single-Crystalline BaTi5O11 Nanocrystals by Hydrothermal Method

Effect of NaOH Concentration on Formation of Ba4Ti13O30 and BaTi5O11 Nanocrystals Prepared by Hydrothermal Method

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

Citric Acid Gel Method Synthesis, Characterization And Dielectric Properties Of Single-Phase Bati4o9

Hydrothermal Synthesis of Tetragonal BaTiO3 Nanotube Arrays with High Dielectric Performance

Morphology and atomic-scale surface structure of barium titanate nanocrystals formed at hydrothermal conditions

Electric Properties of BaTiO3 Ceramics Sintered with the Hydrothermally Prepared Powers

Dielectric and Ferroelectric Properties of BaTiO3 Nanofibers Prepared Via Electrospinning

BaTiO3 Nanocrystals: Hydrothermal Synthesis and Structural Characterization

Dielectric Properties of BaTiO3 Based Ceramics Prepared from Nano-powders

(1- x)(Na₀.₅Bi₀.₅)TiO₃- x CaTiO₃ ceramics: Investigating structural and microstructural features for enhanced dielectric properties

Hydrothermal synthesis and morphology control mechanism of BaTiO3 from NaTi3O6(OH)(H2O)2 precursors

Dielectric Study in Nanocrystalline Bi4Ti3O12 Prepared by Chemical Coprecipitation

Structure and Electrical Properties of BaTiO3 Prepared by Sol–gel Process

Study on peculiar properties of nanocrystalline BaTiO3 powder and ceramics

Enhanced Dielectric Properties in (in, Nb) Co-Doped BaTiO3 Ceramics

Temperature Dependence on the Dielectric and Ferroelectric Properties of Nanocrystalline BaTiO_3 Ceramics

Microstructural Characterization of BaTiO3 Ceramic Nanoparticles Synthesized by the Hydrothermal Technique