Abstract:Compared with the electric servoactuator, the macrofiber composite precompressed bimorph actuator (MFC-PBA) can be embedded into the airfoil to drive the deformation, thus saving the layout space and ensuring aerodynamic performance. However, the axial pressures of existing PBAs cannot be adjusted, which prevents MFC bimorph from achieving higher actuating performance under external load. Additionally, long-term high axial pressure causes permanent deformation and fracture of bimorph structure. Thus, an actuator using a twisted and coiled polymer actuator (TCPA) to regulate the axial pressure of MFC-PBA is proposed in this article, which can be referred to as the TM-PBA. First, a thermally driven tension gray-box model is established to obtain the tensile force of the TCPA under fixed boundary conditions at both ends. The thermally driven tension model is then combined with a finite-element model of the MFC bimorph to establish a complete mechanical model of the TM-PBA. Subsequently, the output tensile force of the TCPA and the actuation performance, frequency response, and hysteresis behavior of the TM-PBA were tested. The results show that the thermally driven tension gray-box model of the TCPA and the complete mechanical model of the TM-PBA can accurately predict the actuation capability of the TCPA and the TM-PBA; the output tensile force of the TCPA increased with increasing temperature and pre-elongation; and the actuation performance of the TM-PBA is 130% higher than that of the MFC-PBA. The control bandwidth of the TM-PBA is more than 10 Hz. Additionally, the TM-PBA hysteresis is related to load and driving frequency. Finally, the TM-PBA was applied to drive a rudder and its actuating capability was verified to be superior to MFC-PBA, but lower than that of the micro servoactuator. In future, the actuation capability can be increased by parallel multilayer TM-PBAs.

Experimental study of axial-compressed macro-fiber composite bimorph with multi-layer parallel actuators for large deformation actuation

Large Deformation Mechanical Modeling with Bilinear Stiffness for Macro-Fiber Composite Bimorph Based on Extending Mixing Rules

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

Axial-Pressure-Adjustable Macro-Fiber Composite Bimorph Actuator Based on Twisted and Coiled Polymer Actuator

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Design and Experiment Research on the Actuators for Large Displacement

Large in-plane displacement microactuators based on electro-thermal bimorphs with folded multiple segments

Lead-free piezoceramic macro-fiber composite actuators toward active vibration control systems

Multi-Mode Shape Control of Active Compliant Aerospace Structures Using Anisotropic Piezocomposite Materials in Antisymmetric Bimorph Configuration

Development of a light-weight robot end-effector using polymeric piezoelectric bimorph

Optimization of Bimorph Based Double Amplifier Actuator under Quasistatic Situation

Design and experimental evaluation of a compact inchworm piezoelectric actuator with bridge-type displacement amplification mechanism

A New Hybrid Piezo-Actuated Compliant Mechanism with Self-Tuned Flexure Arm

High-frequency Performance for a Spiral-Shaped Piezoelectric Bimorph

A novel macro-fiber-composite stick-slip actuator with large single-step displacements

A Spongy Graphene Based Bimorph Actuator With Ultra-Large Displacement Towards Biomimetic Application

Experimental Study on Displacement Characteristics of Piezoelectric Bimorphs Fixed by Two Tips

A hybrid summation and multiplication displacement amplification mechanism for piezoelectric actuators

A Large In-plane-displacement Micro-platform Based on Electrothermal Bimorph Actuation

Dynamic shape control of piezocomposite-actuated morphing wings with vibration suppression