Design and Experimental Research of Piezoelectric Pump Based on Macro Fiber Composite

Jingshi Dong,Chang Liu,Quanqu Chen,Zhi Xu,Wenhua Chen,Yue Wu,Zhigang Yang

DOI: https://doi.org/10.1016/j.sna.2020.112123

2020-01-01

Abstract:A novel piezoelectric pump is proposed in which the drive element consists of two large fiber composite (MFC) layers cross-bonded to a circular beryllium bronze substrate. Both finite element analysis and experiments were carried out. According to previous studies, MFC can be approximated by conventional piezoelectric ceramic materials, and the actuator works in a reciprocating motion. The vertical deformation of the actuator decreases as the thickness of the substrate increases, and increases as the angle of the MFC layer increases until the angle is 90 degrees. The output performance of the new piezoelectric pump was tested with air and pure water. At a frequency of 15 Hz, the maximum output flow rate was 380.88 ml/min with air as the experimental medium. The pure output water was used as the experimental medium. The maximum output flow was 28.70 ml/min. (C) 2020 Elsevier B.V. All rights reserved.