Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

Design and Experiment Research on the Actuators for Large Displacement

Experimental study of axial-compressed macro-fiber composite bimorph with multi-layer parallel actuators for large deformation actuation

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

Finite Element Analyses on Large Displacement Piezoelectric Actuator

Design Of A Piezoelectric Exciter Actuator For Micro-Displacement Control - Theory And Experiment

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Achieving smooth motion in displacement amplification piezoelectric stick-slip actuator

Bidirectional Drive with Inhibited Hysteresis for Piezoelectric Actuators

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

Design and experimental evaluation of a compact inchworm piezoelectric actuator with bridge-type displacement amplification mechanism

Experiments and Study of a Low-Frequency, High-Speed Bi-Directional Piezoelectric Stick-Slip Actuator

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed

Design and Experimental Research on the Piezoceramic Active Member

Design and Experiments of a Miniature Piezoelectric Actuator Using a Multilayer PZT Bimorph

Amplifying transmission and compact suspension for a low-profile, large-displacement piezoelectric actuator

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

The Design and Research on a New Piezoelectric Torsion Actuator

Enhanced velocity and weight-bearing capability of piezoelectric viscous-slip actuators utilising a pentagonal flexible hinge configuration

Research and Application of Technology for a New Piezoelectric Ceramic Actuators

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes