Abstract:A novel approach is developed by incorporating buried selenium seed layers to enhance the performance of Sb2Se3 solar cells through improved heterojunction quality and reduced defect density. This method significantly boosts both VOC and PCE, reaching 498.3 mV and 8.42%, respectively, marking the highest efficiency reported for Sb2Se3 solar cells prepared via VTD. Quasi‐1D antimony selenide (Sb2Se3) is known for its stable phase structure and excellent light absorption coefficient, making it a promising material for high‐efficiency light harvesting. However, the (Sb4Se6)n ribbons align horizontally, increasing defect interference and limiting vertical carrier transport. Herein, a novel strategy of burying selenium (Se) seed layers to reduce lattice mismatch at the heterojunction interface, promote crystal orientation, mitigate deep donor defects, increase P‐type carrier concentration, and purify the PN junction, is proposed. Admittance spectroscopy reveals that Sb2Se3 solar cells with Se seed layers have higher activation energies for defect states and significantly lower defect densities (1.2 × 1014, 2.7 × 1014, and 1.3 × 1015 cm−3 for D1, D2, and D3) compared to an order of magnitude higher densities in Sb2Se3 solar cells without a Se seed layer. First‐principles calculations support these findings, showing that Se seed layers create a Se‐rich environment, reducing selenium vacancies (VSe), antimony on selenium sites (SbSe), and interface defects. This dual passivation mechanism suppresses defect formation and activation, increasing carrier concentration and open‐circuit voltage (VOC). Ultimately, employing this novel method, a VOC of 498.3 mV and an efficiency of 8.42%, the highest performance reported for Sb2Se3 solar cells prepared via vapor transport deposition (VTD), are achieved.

Efficient defect passivation of Sb2Se3 film by tellurium doping for high performance solar cells

Efficient defect passivation of Sb<sub>2</sub>Se<sub>3</sub> film by tellurium doping for high performance solar cells

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Enhanced Sb2Se3 Solar Cell Performance Through Theory-Guided Defect Control

Confined‐Space Selenium‐Assisted Tellurization Posttreatment Strategy for Efficient Full‐Inorganic Sb2S3 Thin‐Film Solar Cells

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Mechanism of Defect Passivation in Sb2Se3 Solar Cells via Buried Selenium Seed Layer

Deep Defects Limiting the Conversion Efficiency of Sb2Se3 Thin-Film Solar Cells.

Active Passivation of Anion Vacancies in Antimony Selenide Film for Efficient Solar Cells

Influence of S-content Ratios on the Defect Properties of Sb2(S , Se1–)3 Thin-Film Solar Cells

Molecular Induced Patching Process Improving Film Quality for High‐Efficiency Cd‐Free Antimony Selenosulfide Solar Cells

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Deep defects limiting the conversion efficiency in Sb2Se3 thin-film solar cells

Crystal Reconstruction and Defect Healing Enabled High-Quality Sb2Se3 Films for Solar Cell Applications

Defects Passivation via Potassium Iodide Post‐Treatment for Antimony Selenosulfide Solar Cells with Improved Performance

Defect control for high efficiency antimony selenosulfide solar cells by interface Engineering of buried monoatomic aluminum oxide layer

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Interface Etching Leads to the Inversion of the Conduction Band Offset Between the CdS/Sb2Se3 Heterojunction and High-Efficient Sb2Se3 Solar Cells

Sb Doping Strategy to Promote Growth and Suppress Defects in Solution-Processed CZTSSe Solar Cells for Improved Optoelectronic Performance