Biodegradable PLA/PBS open-cell foam fabricated by supercritical CO2 foaming for selective oil-adsorption

Bo Li,Guoqun Zhao,Guilong Wang,Lei Zhang,Jie Gong,Zhanlin Shi
DOI: https://doi.org/10.1016/j.seppur.2020.117949
IF: 8.6
2021-02-01
Separation and Purification Technology
Abstract:<p>Selective oil-adsorbing materials are crucial for the treatment of oil spills and oily wastewater. However, most existing oil-adsorbing materials are traditional petroleum-based polymers that consume non-renewable resources and generate hardly-degradable plastic waste. Moreover, toxic organic solvents are usually used in their preparation process, which also causes environmental pollution. Herein, fully biodegradable poly(lactic acid) (PLA)/poly(butylenes succinate) (PBS) foams with outstanding selective oil-adsorption performance were successfully prepared using the supercritical CO<sub>2</sub> foaming technology, a solvent-free process. With PLA as the matrix and PBS as the cell-opener, the resulted PLA/PBS foam shows a highly interconnected lace-like open-cell structure and an open-cell content of 98.2%. Meanwhile, the PLA/PBS open-cell foam possesses an expansion ratio of 43.6 and a porosity of 97.7%, which are about 315% higher than previous research. The PLA/PBS foam can selectively adsorb oil from water to achieve efficient oil–water separation and water purification. The PLA/PBS foam presents an adsorption capacity of 7.9–21.9 g/g for various organic solvents and oils. What's more, the adsorption capacity for CCl<sub>4</sub> shows no obvious attenuation during 20 adsorption–desorption cycles. These benefit from its unique open-cell structure and high porosity. This work provides a new method for the green preparation of eco-friendly high-performance oil-adsorbing materials.</p>
engineering, chemical
What problem does this paper attempt to address?
The paper attempts to address the problem of developing an environmentally friendly and efficient oil adsorption material for dealing with oil spills and oily wastewater. Specifically, the paper focuses on the preparation of fully biodegradable polylactic acid (PLA)/polybutylene succinate (PBS) open-cell foams using supercritical carbon dioxide foaming technology, which exhibits excellent oil-selective adsorption performance. ### Background and Problem 1. **Environmental Issues**: Oil spills and industrial oily wastewater lead to severe environmental pollution, resource wastage, and economic losses. Efficient oil-water separation is key to solving these problems. 2. **Deficiencies of Existing Materials**: - Most existing oil adsorption materials are traditional petroleum-based polymers, which consume non-renewable resources and generate non-degradable plastic waste, causing serious environmental pollution. - The preparation process usually involves toxic organic solvents, leading to secondary environmental pollution, increasing preparation steps, and compromising the degradability of the materials. ### Solution 1. **Material Selection**: Use bio-based and degradable polylactic acid (PLA) and polybutylene succinate (PBS) as the base materials. 2. **Preparation Method**: Adopt supercritical carbon dioxide foaming technology, which is a solvent-free process and environmentally friendly. 3. **Structure Optimization**: By adjusting the ratio of PLA/PBS and the foaming conditions, prepare a highly interconnected open-cell structure with a high expansion ratio and high porosity. ### Main Achievements 1. **Material Performance**: - Successfully prepared PLA/PBS open-cell foams with an open-cell rate of 98.2%, an expansion ratio of 43.6, and a porosity of 97.7%. - The adsorption capacity for various organic solvents and oils ranges from 7.9 to 21.9 g/g. - No significant decrease in adsorption capacity for carbon tetrachloride after 20 adsorption-desorption cycles. 2. **Application Prospects**: - The material can effectively selectively adsorb oil from water, achieving efficient oil-water separation and water purification. - Provides a new green method for preparing high-performance oil adsorption materials. In summary, the paper aims to address the environmental issues of traditional oil adsorption materials by developing fully biodegradable PLA/PBS open-cell foams and providing an efficient and environmentally friendly oil-water separation solution.