Abstract:Efficient and safe cleanup for the high-viscosity heavy oil spill has been a worldwide challenge due to its sluggish flowability, while classic absorption methods by electric/solar heating are seriously limited by low efficiency and high fire hazards during heating of highly flammable oil. Facing this dilemma, we reported a novel flame-retardant photothermal conversion nanocoating to endow commercial foams with highly efficient and safe heavy oil cleanup absorption. This multifunctional nanocoating consisting of nano-Fe3O4 and reduced graphene oxide (rGO) that both showed photothermal conversion ability and non-flammable nature can be firmly deposited on the polymer foam skeletons via facile coprecipitation and dip-coating processes. The composite foam showed a tough morphology with high hydrophobicity and low density, thus leading to selective high absorption for various oils and organic solvents. Due to the double photothermal conversion effects of nano-Fe3O4 and rGO, the temperature of the foam can be rapidly heated at a rate of ∼103.5 °C/min (the fastest rate ever) under 1 sun irradiation. Consequently, the foam with a high absorption capacity of 75.1 times its weight demonstrated a rapid absorption rate of 9000 g m–2 min–1 for large-viscosity oil under 1 sun irradiation, which was 3 times faster than previously reported. Furthermore, benefitting from high flame retardancy, elasticity, and magnetism, the foam can be safely and repeatedly used for magnetically controllable oil cleanup absorption, which effectively avoids oil spill hazards.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22596?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22596</a>.Fe element mapping for the Fe3O4/MF and rGO/Fe3O4/MF foams; pore-size distributions of the MF, Fe3O4/MF, and rGO/Fe3O4/MF foams calculated by the mercury intrusion method; deformation recovery and strength recovery at different compressing–releasing cyclic processes for the MF and Fe3O4/MF foams; digital photographs of the recovery process for n-hexane and dichloromethane (dyed with Sudan III) absorbed in the rGO/Fe3O4/MF foam by compression; reflectance and transmission spectra for the rGO/Fe3O4/MF foam; schematic illustration of the solar steam generation experimental setup and solar vapor generator floating on ethanol in a beaker wrapped with thermal insulation materials; absorption process of the rGO/Fe3O4/MF foam for dichloromethane (dyed with Sudan III), water contact angle values of the rGO/Fe3O4/MF foam, and absorption capacities of the rGO/Fe3O4/MF foam for various oils and organic solvents; digital photographs of the removal process of n-hexane (dyed with Sudan III) floating on water and dichloromethane (dyed with Sudan III) sinking in water using the rGO/Fe3O4/MF foam; continuous solar-assisted vacuum absorption equipment of the rGO/Fe3O4/MF foam and time-lapse photography illustrating the continuous oil absorption process; TG and DTG curves of different foams in the air atmosphere; basic properties of heavy crude oil; porous characteristics, strength recovery, deformation recovery, saturation magnetization (MS), electrical conductivity, and data from microcalorimetry tests; comparison of MF-based oil absorbents in the recent literature; and material cost for the rGO/Fe3O4/MF foam production (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22596/suppl_file/am0c22596_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of hydrophobic and fire-retarding poly(lactic acid)/graphene oxide foams for oil/organic solvents absorption

Biodegradable Ultra-Large Expansion and High Open-Cell PLA/PBAT Foams Fabricated by Supercritical CO2 Foaming for Selective Oil/Water Absorption

Durable Superhydrophobic/Superoleophilic Graphene-based Foam for High-efficiency Oil Spill Cleanups and Recovery.

High hydrophobic poly(lactic acid) foams impregnating one-step Si–F modified lignin nanoparticles for oil/organic solvents absorption

Hydrophobic and oleophilic open-cell foams from in-situ microfibrillation blends of poly(lactic acid) and polytetrafluoroethylene: Selective oil-adsorption behaviors

Supercritical CO2 extrusion foaming of highly open-cell poly(lactic acid) foam with superior oil adsorption performance

Highly Durable Superhydrophobic Polymer Foams Fabricated by Extrusion and Supercritical CO2 Foaming for Selective Oil Absorption

Superhydrophobic reduced graphene oxide@poly(lactic acid) foam with electrothermal effect for fast separation of viscous crude oil

Biodegradable PLA/PBS open-cell foam fabricated by supercritical CO2 foaming for selective oil-adsorption

Multifunctional superhydrophilic/underwater superoleophobic lignin-based polyurethane foam for highly efficient oil-water separation and water purification

Multifunctional Photothermal Conversion Nanocoatings Toward Highly Efficient and Safe High-Viscosity Oil Cleanup Absorption

Preparation of 3-D porous PVDF/TPU composite foam with superoleophilic/hydrophobicity for the efficient separation of oils and organics from water

Advanced superhydrophobic polylactic acid fibers with high porosity and biodegradability for efficient solvent recovery

Lightweight, Hydrophobic and Recyclable Carbon Foam Derived from Lignin–resorcinol–glyoxal Resin for Oil and Solvent Spill Capture

Superhydrophobic/Superoleophilic Polyurethane /reduced Graphene Oxide/ Sponge for Efficient Oil-Water Separation and Photothermal Remediation

Fabrication of Foam-Like Oil Sorbent from Polylactic Acid and Calotropis Gigantea Fiber for Effective Oil Absorption

A scalable versatile methodology to construct micro/nano open-cell polypropylene foam with high oil adsorption capacity and speed

Waste to treasure: Superwetting foam enhanced by bamboo powder for sustainable on-demand oil-water separation

Robust superhydrophobic polyurethane sponge functionalized with perfluorinated graphene oxide for efficient immiscible oil/water mixture, stable emulsion separation and crude oil dehydration

Superhydrophobic aerogel membrane with integrated functions of biopolymers for efficient oil/water separation

Preparation of biomass carbon/polyurethane foams for selective oil/water absorption