Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

Super High‐Expansion Poly(Lactic Acid) Foams with Excellent Oil‐Adsorption and Thermal‐Insulation Properties Fabricated by Supercritical CO 2 Foaming

Biodegradable Ultra-Large Expansion and High Open-Cell PLA/PBAT Foams Fabricated by Supercritical CO2 Foaming for Selective Oil/Water Absorption

Supercritical CO2 extrusion foaming of highly open-cell poly(lactic acid) foam with superior oil adsorption performance

High-Expansion Open-Cell Polylactide Foams Prepared by Microcellular Foaming Based on Stereocomplexation Mechanism with Outstanding Oil-Water Separation

Biodegradable PLA/PBS open-cell foam fabricated by supercritical CO2 foaming for selective oil-adsorption

Hydrophobic and oleophilic open-cell foams from in-situ microfibrillation blends of poly(lactic acid) and polytetrafluoroethylene: Selective oil-adsorption behaviors

Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging

High-expansion-ratio PLLA/PDLA/HNT composite foams with good thermally insulating property and enhanced compression performance via supercritical CO2

A scalable versatile methodology to construct micro/nano open-cell polypropylene foam with high oil adsorption capacity and speed

Extruded polylactide bead foams using anhydrous supercritical CO2 extrusion foaming

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization

A Facile and Clean Strategy to Manufacture Functional Polylactic acid Bead Foams

High hydrophobic poly(lactic acid) foams impregnating one-step Si–F modified lignin nanoparticles for oil/organic solvents absorption

Multi-Response Optimization and Cell Structure-Property Relationships of Polylactide (PLA) Foams

Enhancing Foamability and Flame‐retardancy of Polylactic Acid Bead Foams Through Inter‐beads Bulk Polymerization and Continuous Phase Dispersion of LDHs

Fabrication of biodegradable poly (lactic acid)/carbon nanotube nanocomposite foams: Significant improvement on rheological property and foamability

Preparation of a High-Expansion-Ratio Blend Foam with Low Thermal Conductivity Using Poly(vinyl alcohol)-Polycaprolactone Mixture Solution via Supercritical Carbon Dioxide Foaming Technology

High-Strength Bio-Degradable Polymer Foams with Stable High Volume-Expansion Ratio Using Chain Extension and Green Supercritical Mixed-Gas Foaming

Preparation of hydrophobic and fire-retarding poly(lactic acid)/graphene oxide foams for oil/organic solvents absorption

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism