Abstract:Highly dispersed CeO2 on carbon nanotubes (CNTs) is successfully prepared by a pyridine-thermal route for selective catalytic reduction (SCR) of NO with NH3. This catalyst is mainly characterized by the techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed reduction by hydrogen (H-2-TPR), temperature-programmed desorption of ammonia (NH3-TPD) and X-ray photoelectron spectroscopy (XPS). The results of the XRD, TEM and TPR analysis show that the CeO2 particles on the CNTs are highly dispersed with a strong interaction between the particles and the CNTs. The NH3-TPD profiles indicate that this catalyst exhibits abundant strong acid sites. Furthermore, the O 1s XPS spectra show that the O-alpha/(O-alpha + O-beta) ratio of this catalyst is very high, which can result in more surface oxygen vacancies and therefore favor the NH3-SCR reaction. Compared with the catalysts prepared by impregnation or physical mixture methods, the catalyst prepared by the pyridine-thermal route presents the best NH3-SCR activity in the temperature range of 150-380 degrees C as well as favourable stability and good SO2 or H2O resistance. More than 90% of NO can be removed in the range of 250-370 degrees C with a desirable N-2 selectivity. Moreover, the NO conversion can be kept at about 97% with the presence of SO2 or H2O at 300 degrees C. In addition, this catalyst shows a high catalytic activity with a NO conversion remaining constant at ca. 98% during a 16 h continuous run duration at 300 degrees C. Highly dispersed CeO2 on the CNTs as well as the strong interaction between the particles and the CNTs, the large amounts of strong acid sites and the high O-alpha/(O-alpha + O-beta) ratio could be ascribed to the excellent NH3-SCR performance of the catalyst prepared by the pyridine-thermal route.

High-performance CeO2/halloysite Hierarchical Catalysts with Promotional Redox Property and Acidity for the Selective Catalytic Reduction of NO with NH3

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

A superior CeO2 @TiO2 catalyst with high dispersion of CeO2 for selective catalytic reduction of NOx with NH3

A Superior Cerium-Tungsten Bimetal Oxide Catalyst with Flower-Like Structure for Selective Catalytic Reduction of NO by NH3

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Design of a hierarchical Fe-ZSM-5@CeO2 catalyst and the enhanced performances for the selective catalytic reduction of NO with NH3

Selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub> over a novel Co-Ce-Ti catalyst

Ce-O-P Material Supported CeO2 Catalysts: A Novel Catalyst for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Single-Atom Ce-Modified Α-Fe2o3 for Selective Catalytic Reduction of NO with NH3.

Low-Temperature Scr of No with Nh3 over Activated Semi-Coke Composite-Supported Rare Earth Oxides

Oxygen-vacancy mediated acidity and redox properties on WOx/Cu-doped CeO2 for the removal of NOx

High Resistance of SO2 and H2O over Monolithic Mn-Fe-Ce-Al-O Catalyst for Low Temperature NH3-SCR

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

The Superior Performance of Sol–Gel Made Ce–O–P Catalyst for Selective Catalytic Reduction of NO with NH3

Cerium Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NO x with NH 3 : A Review

The Enhanced Performance of Ceria with Surface Sulfation for Selective Catalytic Reduction of No by Nh3

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

Highly Dispersed Ceo2 on Carbon Nanotubes for Selective Catalytic Reduction of No with Nh3

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3