Abstract:In the quest to enhance the performance of conventional high-temperature alloys, the limitations of existing materials have become apparent. Refractory high entropy alloys (RHEAs) have emerged as promising candidates, exhibiting exceptional high-temperature properties and offering a novel perspective on advanced materials for extreme environments. This study systematically determined optimal process parameters via single-channel laser cladding (LC), resulting in the development of multi-channel TaNbZrTi RHEA coatings. The investigation encompassed an in-depth analysis of microstructure and oxidation behavior across a temperature range spanning from 800 to 1200 °C. The findings elucidated the complex composition of the coating, characterized by the interplay of BCC1, BCC2, and Fe 2 Nb phases. The theoretical yield strength of the coating was calculated at 1816.1 MPa, with contributions from solution strengthening, precipitation strengthening, fine crystal strengthening, and alloy foundation strength, standing at 41.1%, 41.5%, 5.5%, and 11.9%, respectively. At 800, 1000 and 1200 °C, the oxide thickness of the coating is 1.4, 2.9, and 34.5 μm, respectively. The transition of BCC2 phase at elevated temperatures and the diffusion of Fe from the substrate emerged as pivotal factors contributing to catastrophic oxidation observed at 1200 °C. Importantly, the diffusion of substrate elements facilitated the formation of Fe 2 Nb phase, which exhibited robust precipitation strengthening effects, further enhancing the coating overall strength. However, the protective role of Fe oxides proved inadequate, leading to the vulnerability of the oxidation layer and its propensity to fracture, thereby compromising the high-temperature oxidation resistance of the coating.

Improvement of High Temperature Oxidation Resistance of Micro Arc Oxidation Coated AlTiNbMo0.5Ta0.5Zr High Entropy Alloy

Effect of Voltage on the Microstructure and High-Temperature Oxidation Resistance of Micro-Arc Oxidation Coatings on AlTiCrVZr Refractory High-Entropy Alloy

Micro-arc Oxidation for Improving High-Temperature Oxidation Resistance of Additively Manufacturing Ti2AlNb

Influence of Electrolyte Compositions on Structure and High-Temperature Oxidation Resistance of Microarc Oxidation Coatings Formed on Ti2AlNb Alloy

Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism

Strengthening mechanisms and high-temperature oxidation properties of laser-clad TaNbZrTi refractory high entropy alloy coatings

Enhanced Oxidation Resistance of MoTaTiCrAl High Entropy Alloys by Removal of Al

Dual Coating Layers to Enhance Oxidation Resistance for Refractory High-Entropy Alloys

Evolution in Wear and High-Temperature Oxidation Resistance of Laser-Clad AlxMoNbTa Refractory High-Entropy Alloys Coatings with Al Addition Content

Achieving exceptional high-temperature strength and oxidation resistance in an additively manufactured refractory high-entropy alloy via strategic elemental substitutions

The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

Refractory high-entropy aluminized coating with excellent oxidation resistance and lubricating property prepared by pack cementation method

Oxidation influences on the microstructure and mechanical properties of W–Nb–Mo–Ta–V–O refractory high-entropy alloy films

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions

Microstructure evolution and performance of TiMoCrW x Ta y refractory high-entropy alloy coatings prepared using laser cladding

Simultaneously enhanced oxidation resistance and mechanical properties in a novel lightweight Ti2VZrNb0.5Al0.5 high-entropy alloy

Oxidation Behavior between 700 and 1300 °C of Refractory TiZrNbHfTa High-Entropy Alloys Containing Aluminum

Investigation of elevated temperature microstructural stability and tribological behavior of Mo x NbTiZr refractory high-entropy alloy coatings optimized by Mo-doping

High Temperature Oxidation Behavior of TiNbMoAlSi Refractory High Entropy Alloy Developed by Electron Beam Additive Manufacturing

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys