Refractory high-entropy aluminized coating with excellent oxidation resistance and lubricating property prepared by pack cementation method

Rui Yang,Huijun Yang,Min Zhang,Xiaohui Shi,Junwei Qiao

DOI: https://doi.org/10.1016/j.surfcoat.2023.129967

IF: 4.865

2023-11-01

Surface and Coatings Technology

Abstract:Refractory high-entropy alloys (RHEAs) exhibit superior mechanical properties at high temperatures compared to that of conventional high-temperature alloys. However, some refractory metallic elements are highly susceptible to oxygen absorption at room temperature and the resulting oxide films are not protective, resulting in catastrophic oxidation before they can exhibit excellent mechanical properties. Therefore, it is essential for them to improve the high-temperature oxidation properties of RHEAs. The pack cementation method can be used to prepare the aluminized coatings on the surface of RHEAs to improve their high-temperature oxidation resistance. In the present work, the aluminized high-entropy coatings were prepared on the surface of as-cast Ta25Nb25W25V25 RHEAs. The diffusion activation energy required for aluminization was experimentally calculated to be 137.667 kJ/mol, thus the growth kinetics of the coating was constructed. Aluminized coatings with the thickness of ∼75 μm and Vickers hardness of ∼680 HV0.01 obtained by holding at 1100 °C for 9 h were selected for the study. The oxidation activation energy of the aluminized coating at 800–1000 °C was 96.981 kJ/mol, while that of as-cast RHEAs was only 48.816 kJ/mol, so the oxidation resistance of the specimen was greatly improved. At 20–600 °C, the aluminized coatings also exhibited excellent wear resistance and lubrication properties. In particular, the average coefficients of friction were reduced by 0.13–0.24 compared to that of as-cast RHEAs, which can be attributed to the AlW intermetallic compound particles formed within the aluminized coating acting as self-lubricating particles.

physics, applied,materials science, coatings & films