Abstract:The series and parallel connection of power electronic devices is the main combination way of solving and realizing high voltage,high power direct current (DC) circuit breakers,and power electronic converters.We researched the static and dynamic voltage-sharing technology of the power electronic devices for high voltage DC breaking.Firstly,the causes of the uneven voltage-sharing of IGCT in series and the voltage-sharing technology of IGCT in series were analyzed to give the voltage-sharing scheme of IGCT in series for DC breaking.Then,the influence of the difference between the buffer capacitance,the buffer resistance and the turn-off trigger time on the voltage-sharing characteristic were analyzed.Finally,a power electronic valve was set up with four IGCTs in series for experimental verification.Research results indicate that,① the static voltage-sharing can adopt the static voltage-sharing resistance in parallel,and the dynamic voltage-sharing in load side can adopt the passive buffer method with buffer circuit in parallel;② the larger the buffer capacitance is,the smaller the buffer resistance is,then the smaller the over-voltage is,and the greater the time difference between the trigger signal is,the greater the degree of non voltage-sharing will be;③ the uneven Voltage-sharing coefficient of the breaking tests of 10.5 kV/1.5 kA is 5.71％,and the voltage-sharing is effective;④ Based on the modular power electronic series valve,the integrated experiments of the hybrid DC circuit breaker are completed,the short circuit current 3.6 kA and the over-voltage 21 kV are turned off within 3 ms.The feasibility of the voltage-sharing scheme of IGCT in series for high voltage DC breaking is verified by experiments,which provides the technical basis for the application of modular power electronic series valve in DC breaking.

Study on Performance Optimization of IGCT Device for DC Circuit Breaker

Current Sharing Characteristics Study of Parallel IGCTs Module in a DC Circuit Breaker

Asynchronous Control Method of Parallel IGCT Components in Hybrid DC Circuit Breakers

Researches on 10 kV DC Hybrid Circuit Breaker Based on IGCT Series

Analysis and Experiments for IGBT, IEGT, and IGCT in Hybrid DC Circuit Breaker

Electrothermal Modeling of IGCT: Application to Hybrid DC Circuit Breaker

Low-Cost HVdc Circuit Breaker With High Current Breaking Capability Based on IGCTs

Investigation Of A Novel Igct Module For Dc Circuit Breaker

Design and Analysis of a 375v/5ka Solid State DC Circuit Breaker Based on IGCT

IGCT Selection Method in Hybrid DC Circuit Breakers Based on TCAD Simulation

Snubber and Metal Oxide Varistor Optimization Design of Modular IGCT Switch for Overvoltage Suppression in Hybrid DC Circuit Breaker

A Novel Oscillating-Commutation Solid-State DC Breaker Based on Compound IGCTs

Transient Current Balancing of Parallel IGCTs in 10-kV/10-kA Hybrid DC Circuit Breaker

Optimization of Operation Temperature of Gate Commutated Thyristors for Hybrid DC Breaker

A Novel DC Circuit Breaker With Counter-Current Injection and IGCT Combined

Voltage Balancing Optimization of Series-Connected Igbts in Solid-State Breaker by Using Driving Signal Adjustment Technique

IGCT Series Voltage-sharing Technology for DC Breaking

Research on a Current Commutation Drive Circuit for Hybrid Dc Circuit Breaker and Its Optimisation Design

Ultra-Low On-State Voltage IGCT for Solid-State DC Circuit Breaker with Single-Switching Attribute

Study on reliability improvement of current-transferring type HVDC circuit breaker

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part Ⅱ: Hybrid Switch with IGBT Integration and Experimental Validation