IGCT Series Voltage-sharing Technology for DC Breaking

Lu QU,Xiangyu ZHANG,Zhengyu CHEN,Zhanqing YU,Rong ZENG

DOI: https://doi.org/10.13336/j.1003-6520.hve.20180131010

2018-01-01

Abstract:The series and parallel connection of power electronic devices is the main combination way of solving and realizing high voltage,high power direct current (DC) circuit breakers,and power electronic converters.We researched the static and dynamic voltage-sharing technology of the power electronic devices for high voltage DC breaking.Firstly,the causes of the uneven voltage-sharing of IGCT in series and the voltage-sharing technology of IGCT in series were analyzed to give the voltage-sharing scheme of IGCT in series for DC breaking.Then,the influence of the difference between the buffer capacitance,the buffer resistance and the turn-off trigger time on the voltage-sharing characteristic were analyzed.Finally,a power electronic valve was set up with four IGCTs in series for experimental verification.Research results indicate that,① the static voltage-sharing can adopt the static voltage-sharing resistance in parallel,and the dynamic voltage-sharing in load side can adopt the passive buffer method with buffer circuit in parallel;② the larger the buffer capacitance is,the smaller the buffer resistance is,then the smaller the over-voltage is,and the greater the time difference between the trigger signal is,the greater the degree of non voltage-sharing will be;③ the uneven Voltage-sharing coefficient of the breaking tests of 10.5 kV/1.5 kA is 5.71％,and the voltage-sharing is effective;④ Based on the modular power electronic series valve,the integrated experiments of the hybrid DC circuit breaker are completed,the short circuit current 3.6 kA and the over-voltage 21 kV are turned off within 3 ms.The feasibility of the voltage-sharing scheme of IGCT in series for high voltage DC breaking is verified by experiments,which provides the technical basis for the application of modular power electronic series valve in DC breaking.