Abstract:Hardening or softening associated with the increase of dislocation density is correlated with strain rate and dislocation density. Taking aluminum as a model material, we investigate the strain rate and dislocation density dependence of the strength and the accompanying hardening or softening effect upon a dislocation increase. This investigation is enabled by employing a newly developed crystal plasticity model, which is validated against the mechanical behaviors in an extremely wide strain rate range, and featured by a parameter-free mobile dislo-cation fraction law based on the exponential distribution of dislocation link lengths and an averaged dislocation velocity model that considers both thermally-activated waiting mechanism and drag-dominated running mechanism. Results show that at different strain rates, the material strength varies with a universal feature that it first softens as the dislocation density increases from a sufficiently low initial value, and then hardens after reaching the minimum strength, where the critical dislocation density separating the softening from hardening regimes increases with the strain rate. Microscopically, the strength dependence on dislocation density and strain rate originates from their influence on the two competing effects of a dislocation increase, where the hardening effect comes from the higher resistance to dislocation slip by increased forest dislocations while the softening effect comes from the larger quantity of mobile dislocations. These two competing effects are quantitatively evaluated by the crystal plasticity model and are further cast into the competition between the partial derivatives of normalized dislocation velocity and of normalized mobile dislocation density, and the governing equation for the critical dislocation density is thus furnished by balancing these two competing effects. Further, a complete map in the entire space of strain rate and dislocation density (epsilon, rho) is constructed for the zones of dislocation hardening or softening, where the zone-boundary curve for critical dislocation density exhibits a two-stage character and it agrees well with the available experimental data. Such a map is expected to help predict the trend for strength evolution under different serving conditions and also guide the material design according to the requirements for strength variation in service.

Dislocation Density Informed Eigenstrain Based Reduced Order Homogenization Modeling: Verification and Application on a Titanium Alloy Structure Subjected to Cyclic Loading

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

An Affine Formulation of Eigenstrain-based Homogenization Method and its Application to Polycrystal Plasticity

A strain rate and temperature-dependent crystal plasticity model for hexagonal close-packed (HCP) materials: Application to α -titanium

Dislocation density-based plasticity model from massive discrete dislocation dynamics database

Effect of deformation heterogeneity on development of geometrically necessary dislocation density in heterogeneous-structured CrMnFeCoNi high-entropy alloy

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

Hierarchical Deformation and Anisotropic Behavior of (α+β) Ti Alloys: A Microstructure-Informed Multiscale Constitutive Model Study

Two-way coupled modeling of dislocation substructure sensitive crystal plasticity and hydrogen diffusion at the crack tip of FCC single crystals

Probing Phase Transformation and Dislocation Evolution in High-Entropy Alloy under Cyclic Loadings

Quantitative Investigations on Dislocation Based Discrete-Continuous Model of Crystal Plasticity at Submicron Scale

Resolving crystallographic geometrically necessary dislocations in three dimensions in a hexagonal close packed titanium alloy

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

Slip intermittency and dwell fatigue in titanium alloys: a discrete dislocation plasticity analysis

A Physically Based Elasto-Viscoplastic Constitutive Model for Modeling the Hot Deformation and Microstructure Evolution of a Near Α Ti Alloy

Correlation Between Dislocation-Density-based Strain Hardening and Microstructural Evolution in Dual Phase TC6 Titanium Alloy

Strain-rate dependent crystal plasticity model and aluminum softening/ hardening transition

The combined and interactive effects of orientation, strain amplitude, cycle number, stacking fault energy and hydrogen doping on microstructure evolution of polycrystalline high-manganese steels under low-cycle fatigue

A new constitutive model for HCP metals