Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

Effect of deformation heterogeneity on development of geometrically necessary dislocation density in heterogeneous-structured CrMnFeCoNi high-entropy alloy

Extra strengthening and Bauschinger effect in gradient high-entropy alloy: A molecular dynamics study

Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations

Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Strain delocalization in a gradient-structured high entropy alloy under uniaxial tensile loading

Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: Nanoindentation experiments and statistical modeling

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation

Dynamic impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition

Dislocation array reflection enhances strain hardening of a dual-phase heterostructured high-entropy alloy

Probing deformation behavior of a refractory high-entropy alloy using in situ neutron diffraction

Compressive deformation behavior of CrMnFeCoNi high-entropy alloy

3D in-situ characterization of dislocation density in nickel-titanium shape memory alloys using high-energy diffraction microscopy

Strengthening the FeCoCrNiMo0.15 high entropy alloy by a gradient structure

Awakening the metastability of an interstitial high entropy alloy via severe deformation

Unconventional Deformation Behaviours of Nanoscaled High-Entropy Alloys.