Abstract:Due to its multi-principal component characteristics, high-entropy alloys exhibit excellent comprehensive mechanical properties and become a new generation of engineering structure alternative materials. At present, a single constitutive model is used to describe the change of flow stress in the study of hot deformation behavior of high-entropy alloys, and there are some problems such as inaccurate prediction accuracy or inapplicability of the model in some hot processing intervals. In this paper, three different constitutive models are combined to fully consider the applicability of the model in different temperature ranges, and the change of flow stress behavior is accurately described, which is of great significance for subsequent deformation mechanism research, hot processing process optimization, numerical simulation and so on. Thermal compression experiments on cast Ni 28.5 Co 18.6 Fe 18.2 Al 16.3 Cr 10.5 Mo 4 Ti 2.3 Nb 0.6 W 0.9 C 0.2 high-entropy alloy were carried out using a Gleeble-3800 thermal simulation tester with deformation temperatures in the range from 900 °C to 1150 °C and strain rates from 0.001 s -1 to 1 s -1 . The constitutive relationships between true stress and strain, temperature and strain rate were established, while the heat deformation process of this alloy under different deformation conditions by Arrhennius, Modified Johnson-Cook and Modified Fields-Backofen models were characterized. The results indicate that Arrenius model describe the rheological behavior of the alloy better in a wider temperature range and at a wider strain rate range. Comparatively, the model shows the highest prediction accuracy in the high-temperature region and slightly lower accuracy in the mesothermal and low-temperature regions. The modified J-C and F-B models have better prediction accuracy in the low-temperature and medium-temperature regions, respectively. Due to the different deformation conditions, dislocation configurations such as dislocation tangles, dislocation networks, and subcrystalline junctions can be observed in the plastic deformation region. The dislocation density of this alloy increases with increasing strain rate and decreasing deformation temperature after deformation.

Compressive deformation behavior of CrMnFeCoNi high-entropy alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

Mechanical properties and microstructure of the Al0.3CoCrFeNiTi0.3 high entropy alloy under dynamic compression

Dynamic impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy

Microstructural Evolution and Mechanical Properties of Non-Equiatomic (CoNi)74.66Cr17Fe8C0.34 High-Entropy Alloy

Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNi high-entropy alloys

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations

Dynamic behavior of CrMnFeCoNi high-entropy alloy in impact tension

High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy

High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading

Hot Deformation Characteristics and Microstructure Evolution of CoCrFeNiZr0.3 Hypoeutectic High-Entropy Alloy

Effect of manganese on mechanical properties and deformation mechanism of CoCrFeNi high entropy alloys

Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure