Abstract:We have found that molybdenum dioxide (MoO2) is an excellent dopant for enhancing electrical conductivities in organic hole-transporting layers. We fabricated hole-only devices with an alpha-sexithiophene (α-6T) layer doped with MoO2 at various concentrations to investigate how doping MoO2 into the α-6T layers influences the hole-injection and hole-transport characteristics of these layers. We observed a marked increase in electrical conductivity as a result of the MoO2 doping. The 30-mol % MoO2-doped α-6T layer had a high electrical conductivity of 8.9±1.3×10−6 S/cm. From the results of our visible/near-infrared absorption spectra study of these doped layers, we confirmed that this increase in electrical conductivity is caused by a charge transfer between MoO2 and α-6T, which leads to an increase in free hole concentration in the doped layers and the formation of an ohmic contact at an electrode/α-6T interface. In the latter part of this paper, we discuss current flow and electroluminescence (EL) characteristics of organic light-emitting diodes (OLEDs) with a 30-mol % MoO2-doped α-6T hole-transporting layer and a 30-mol % Cs-doped phenyldipyrenylphosphine oxide (POPy2) electron-transporting layer. We achieved an extremely low driving voltage of 3.1 V required for a current density of 100 mA/cm2 in the doped OLEDs owing to the use of the α-6T and POPy2 layers with high carrier mobilities and the excellent p-type MoO2 and n-type Cs dopants. We demonstrated the enhancement of power efficiencies by ≈2 times in the doped OLEDs compared with undoped OLEDs and observed bright EL at low driving voltages in the doped OLEDs, for example, 100 cd/m2 at 2.3 V, 1000 cd/m2 at 2.7 V, and 10 000 cd/m2 at 3.3 V.

Hole Injection Enhancement of MoO3/NPB/Al Composite Anode

Hole Injection Enhancement of MoO<sub>3</sub>/NPB/Al Composite Anode<sup>*</sup>

Efficient n-doping of MoO3 for improved performance of organic light emitting diodes and polymer solar cells

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/MoO3 Composite Layer for Efficient and Stable Hole Injection in Organic Semiconductors

Three-dimensionally ordered mesoporous multicomponent (Ni, Mo) metal oxide/N-doped carbon composite with superior Li-ion storage performance

Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

Assistance of Partially Reduced Moo3 Interlayer to Hole-Injection at Iron Phthalocyanine/Ito Interface Evidenced by Photoemission Study

A novel hole extraction layer to enhance the performance of inverted organic solar cells

Performances enhancement in OLEDs by inserting ultrathin trilayer in electron injection structure and using MoO3 as hole buffer layer.

PMA:MoO3nanocomposite hole transport layer for organic solar cells

Enhancing Hole-Injection Efficiency of Top-Emitting Organic Light-Emitting Diodes Based on Al/MoNx Anodes

Formation of Ohmic hole injection by inserting an ultrathin layer of molybdenum trioxide between indium tin oxide and organic hole-transporting layers

Enabling improved lithium storage properties of novel LiNbMoO6 anode through co-modification by uniform Li2SiO3 thin film and oxygen vacancies

Electroluminescence Performance Of Organic Light-Emitting Diode With Molybdenum Trioxide Inside Hole Transport Layer

Enhanced hole injection and transport in molybdenum-dioxide-doped organic hole-transporting layers

Reduction of driving voltage in organic light-emitting diodes with molybdenum trioxide in CuPc/NPB interface

Optimal hole extraction performance in MoOx-incorporated PEDOT:PSS films for organic photovoltaics

Core–Sheath Structured MoO3@MoS2 Composite for High-Performance Lithium-Ion Battery Anodes

Core–Sheath Structured MoO 3 @MoS 2 Composite for High-Performance Lithium-Ion Battery Anodes

Engineering MoOx /mxene Hole Transfer Layers for Unexpected Boosting of Photoelectrochemical Water Oxidation.

Role of MoO_3 as an anode buffer layer in organic photovoltaic cells