Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Core–Sheath Structured MoO3@MoS2 Composite for High-Performance Lithium-Ion Battery Anodes

Core–Sheath Structured MoO 3 @MoS 2 Composite for High-Performance Lithium-Ion Battery Anodes

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

MoO2 Nanobelts Modified with an MOF-derived Carbon Layer for High Performance Lithium-Ion Battery Anodes

In Situ Synthesis of Concentric C@MoS 2 Core–shell Nanospheres As Anode for Lithium Ion Battery

MOF-derived MnO/C composites as high-performance lithium-ion battery anodes

Plant-cell oriented few-layer MoS<sub>2</sub>/C as high performance anodes for lithium-ion batteries

Carbon nanofiber-wrapped core–shell MoO3 nanorod composite material for lithium-ion battery anodes

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Monodisperse MoS2/Graphite Composite Anode Materials for Advanced Lithium Ion Batteries

MOF-derived iron sulfide nanocomposite with sulfur-doped carbon shell as a promising anode material for high-performance lithium-ion batteries

Unique three-dimensional hierarchical heterogeneous MoS2/graphene structures as a high-performance anode material for lithium-ion batteries

Interconnected MoO 2 /MoS 2 @NC nanosheets as anodes with high-rate and long-life for lithium-ion and sodium-ion batteries

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries

Integrated design of sandwich-like C@MoS2@C nanospheres as active anode material for lithium-ion batteries

Plant-cell oriented few-layer MoS2/C as high performance anodes for lithium-ion batteries

Co3O4 nanosheets anchored on C/Cu porous microspheres as high-performance anode materials for lithium-ion battery

The fabrication of hierarchical MoO2@MoS2/rGO composite as high reversible anode material for lithium ion batteries

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Facile synthesis of hetero-structured few-layer MoS2-coated MoO2 as superior anode materials of lithium ion batteries