Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Construction of Hierarchical Hollow MoS2/Carbon Microspheres for Enhanced Lithium Storage Performance

Core-shell Structure of Hierarchical Quasi-Hollow MoS2 Microspheres Encapsulated Porous Carbon As Stable Anode for Li-ion Batteries.

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

From Dispersed Microspheres to Interconnected Nanospheres: Carbon-Sandwiched Mono Layered Mos2 As High-Performance Anode of Li-Ion Batteries

In Situ Synthesis of Concentric C@MoS 2 Core–shell Nanospheres As Anode for Lithium Ion Battery

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

N-doped carbon-coated MoS2 nanosheets on hollow carbon microspheres for high-performance lithium-ion batteries

Few‐Layer MoS2 Nanosheets Encapsulated in N‐Doped Carbon Hollow Spheres As Long‐Life Anode Materials for Lithium‐Ion Batteries

Facile synthesis of MoS 2 confined in yolk-shell hollow mesoporous carbon spheres with enhanced polysulfide binding for high-rate Li-S batteries

Pseudocapacitance and Diffusion-Controlled Dual Modes of MoS2 Nano-Particles Enable High Long-Cycle Anode Capacity

Novel C/MoS2 hollow nanocomposites enhance lithium storage in battery anodes

Ultrathin MoS2 anchored on 3D carbon skeleton containing SnS quantum dots as a high-performance anode for advanced lithium ion batteries

The Synthesis of Yolk-Shell Structure Assembled by MoS2@N, S-doped Carbon for Enhanced Electrochemical Performance

Preparation of Hollow Microsphere@onion-Like Solid Nanosphere MoS2coated by a Carbon Shell As a Stable Anode for Optimized Lithium Storage

Vertically Aligned MoS2 Nanosheets Patterned on Electrochemically Exfoliated Graphene for High-Performance Lithium and Sodium Storage

Plant-cell oriented few-layer MoS<sub>2</sub>/C as high performance anodes for lithium-ion batteries

Cu@MoO2@C Nanocomposite with Stable Yolk-Shell Structure for High Performance Lithium-Ion Batteries

Facile Synthesis of Molybdenum Disulfide Nanosheets/Nitrogen-Doped Porous Carbon Composites for High-Performance Anode Material in Lithium-Ion Batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Hierarchical MoS2 @carbon Microspheres As Advanced Anodes for Li-Ion Batteries.