Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

PMA:MoO3nanocomposite hole transport layer for organic solar cells

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

MoO3–Au Composite Interfacial Layer for High Efficiency and Air-Stable Organic Solar Cells

Optimal hole extraction performance in MoOx-incorporated PEDOT:PSS films for organic photovoltaics

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaics

Efficient non-fullerene organic solar cells employing aqueous solution-processed MoO3 as a hole-transporting layer

Solution-Processed Mosx Thin-Films As Hole-Transport Layers for Efficient Polymer Solar Cells

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells

Improved efficiency of organic solar cell using MoS2 doped poly(3,4-ethylenedioxythiophene)(PEDOT) as hole transport layer

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

Solution-based electrical doping of organic photovoltaics with non-fullerene acceptors facilitated by solvent vapor pre-treatment

Solution preparation of molybdenum oxide on graphene: a hole transport layer for efficient perovskite solar cells with a 1.12 V high open-circuit voltage

Producing p‐Doped Surface for Hole Transporting Layer‐Free Nonfullerene Organic Solar Cells

n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells