Abstract:<p>The chloride diffusion coefficient of mortar was estimated commonly based on the porosity or critical pore size of cement paste, presenting large deviation between theoretical calculation values and measurement results, and then low reliability. The diffusion pathway of chloride can be theoretically characterized by pore tortuosity, which combines the effects of both porosity and pore size distribution. However, correlation between chloride diffusion coefficient and pore tortuosity has not been established yet. In present study, the pore structurally designed of cement pastes were prepared by changing the particle size of Portland cement and water-to-cement ratio, then porosity, pore size distribution, and pore tortuosity were calculated based on mercury intrusion-extrusion profile. A conception of "tortuosity contribution factor" was proposed to quantify the contribution of each pore size fraction to the tortuosity of cement paste. The small capillary pore with radius of 5–20 nm had highest contribution to the pore tortuosity. For a given porosity, 10% increase of small capillary pore led to a 22.6% increase of pore tortuosity, resulting in a 33.5% drop of chloride diffusion coefficient. While 10% increase of large-sized capillary pore with radius of 20–50 nm resulted in 5.7% increase of pore tortuosity and consequently 10.5% drop of chloride diffusion coefficient. The results will provide a better understanding in evaluation of chloride diffusivity of cement-based materials and optimization of pore structure to improve chloride resistance efficiently.</p>

Changes of Pore Structure and Chloride Content in Cement Pastes after Pore Solution Expression

Influence of evaporation rate on pore size distribution, water loss, and early-age drying shrinkage of cement paste after the initial setting

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Extraction and analysis of pore solution of cement paste: desaturation and resaturation cycles using a non-destructive method by gas injection

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Evaluating the chloride diffusion coefficient of cement mortars based on the tortuosity of pore structurally-designed cement pastes

Pore Crystallization and Expansion of Cement Pastes in Sulfate Solutions with and Without Chlorides

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Study of the Relationship between the Strength of the hydrated Cement Paste with Flyash and its Pore structure

Pore Structure of Cement Pastes Through NAD and MIP Analysis

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Characterizing Pore Structure of Cement Blend Pastes Using Water Vapor Sorption Analysis

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Numerical Simulation of Ionic Transport in Cement Paste under the Action of Externally Applied Electric Field

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

Pore structure characterization of cement pastes blended with high-volume fly-ash

Surface relaxation and permeability of cement pastes with hydrophobic agent: Combining 1H NMR and BET

Using a Pore-Scale Modelling Approach to Study Solute Dilution Process Through Cemented Porous Media

Experimental Investigation and Numerical Simulation for Chloride Diffusivity of Cement Paste with Elliptical Cement Particles

Chloride Distribution Feature in Surface Layer of Cement Paste under Cyclic Drying-Wetting Condition