Abstract:The interest in miniature device has led to the development of thin film bulk acoustic wave resonator (FBAR). The function of a resonator to gain a high resonant frequency value of an equipment make FBAR is suitable to act as sensor and filter for wide range of applications. The success of FBAR in providing a reduction of cost and power consumption make it an applicable device. It can be integrated with carbon nanotubes and oscillator circuit to enhance its performance as a gas sensor. Some of the chosen piezoelectric thin film are zinc oxide (ZnO) and aluminum nitride (AlN). This paper focuses on implementing FBAR as gas sensing application to monitor a person's health using breath analysis. The establishment of FBAR sensor to detect acetone gas as breath marker for diabetic disease through breath analysis is emphasize in this paper. A thin film FBAR is modelled using finite element simulation to evaluate its performances in term of coupling coefficient, sensitivity and resonance frequency. Zinc oxide was chosen as the piezoelectric thin film, aluminum as electrodes and silicon as substrate. FBAR sensor with ZnO thickness of $4.4\ \boldsymbol{\mu} \mathbf{m}$ demonstrated the highest coupling coefficient of 0.0643 at 472.65 MHz resonance frequency. The result is comparable to other previous works on FBAR sensor. Hence, this work indicates that FBAR has high potential for breath analysis. It can detect which type of gases exhaled by patient based on the different mass sensitivity value and different type of diseases can be identified.

Analyzing the Effect of the Front-end Circuit for the FBAR Sensor

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

High-performance Virtual Sensors Array Based on a Single-chip FBAR for Volatile Organic Compounds (vocs) Detection and Classification

Impact of Fringe Effect on Measuring Accuracy of Planar Capacitive Sensors

FEM model and simulation effect of electrode shape on transverse coupling wave in FBAR sensor

A LOW POWER, LOW PHASE NOISE FBAR OSCILLATOR

Frequency perturbation integral for FBAR mass sensors and frequency shifts due to nonuniform mass layers

High-performance FBAR Humidity Sensor Based on the PI Film As the Multifunctional Layer

Ultra-low noise front-end design for smart optical sensors with high sensitivity and wide dynamic range

Wireless Tiny Mass Sensor System Based On Fbar

Design and Implementation of low phase noise oscillator based on film bulk acoustic resonator

FBAR Temperature Sensor with a Sealed Air Room

Noise reduction in the surface plasmon resonance array sensor

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

Design and simulation of Film Bulk Acoustic Wave Resonator (FBAR) Gas Sensor Based on ZnO Thin Film

Influence of external swelling stress on the frequency characteristics of a volatile organic compound (VOC) sensor based on a polymer-coated film bulk acoustic resonator (FBAR)

Improvement Of Humidity Stability For Optoelectronic Electric Field Sensor

A Design Approach for High-Q FBARs with Double Frames

A Single Fbar-Based Temperature and Pressure Sensors

Research and Optimization of High-Performance Front-End Circuit Noise for Inertial Sensors

Exploration of Vibration Signal Measurement Method of Automobile Parts Utilizing FPGA/Photoelectric Sensor