Abstract:High voltage power switches are needed for medium-voltage (MV) grid applications such as Solid-state Transformers. The series-connection of low voltage devices is a cost-effective alternative approach to achieve higher blocking voltages. Furthermore, all reported high voltage SiC switches to date are unidirectional voltage blocking devices. Additional devices or power stages such as unfolding bridges are needed for MV AC applications. Combining high blocking voltage and bidirectional operation capability into one single module is, therefore, very attractive for future MV AC applications. This paper proposes a forced-air cooled 15 kV/50 A SiC AC switch based on the series-connection of 1700 V SiC MOSFETs. The AC switch consists of two identical parts connected source-to-source. Each part includes ten 1700 V SiC MOSFETs in series. Each set of ten SiC MOSFETs are driven by a common gate signal. A quantitative switching transient model is developed to expound on how multiple critical factors affect the voltage balancing during the switching transient. A preliminary voltage balancing performance is predicted using the proposed model. A dynamic balancing dV/dt snubber capacitor is then designed to achieve satisfactory voltage balance. A 10.5 kV/30 A double pulse test (DPT) is carried out to verify the feasibility of the designed AC switch and the validity of the proposed switching model. Necessary electrical characteristics of the fabricated 15 kV SiC AC switch are characterized for future applications. Auxiliary gate power supplies with 30 kV galvanic isolation capability are designed to support the intended MV applications. Based on the 15 kV SiC AC switch, a 7.2 kVac/100 kVA series resonant converter is developed and experimentally demonstrated to further verify the feasibility of the proposed device stacking technology.

7.2-Kv/60-a Austin SuperMOS: an Intelligent Medium-Voltage SiC Power Switch

7.2-Kv/60-a Austin SuperMOS: an Enabling SiC Switch Technology for Medium Voltage Applications

Packaging and Characterization of a Novel 7.2kv/85a SiC Austin SuperMOS Half-Bridge Intelligent Power Module (IPM)

High Isolation Auxiliary Power Supply for Medium-Voltage Power Electronics Building Block

A Novel Series-Parallel Design of the 3.6kv/400a SiC Austin SuperMOS

A Novel 3.6kV/400A SiC Intelligent Power Module (IPM)

ZVS range extension of 10A 15kV SiC MOSFET based 20kW Dual Active Half Bridge (DHB) DC-DC converter

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

15-Kv/50-a SiC AC Switch Based on Series Connection of 1.7-Kv MOSFETs

Design and Characterization of 4.5kv/ $15\mathrm{m}\omega$ SiC SuperMOS Half-bridge Module

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Design, Packaging, and Characterization of a 6.8kV/160A SiC SuperCascode Half-Bridge Module for Medium Voltage Applications

1.2 Kv/400 A SiC Source Turn-Off MOSFET Intelligent Power Module

Development of 6kv SiC Hybrid Power Switch Based on 1200V SiC JFET and MOSFET

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

High Performance Solid-State Switches Using Series-Connected SiC-MOSFETs for High Voltage Applications

3.38 Mhz Operation of 1.2kv SiC MOSFET with Integrated Ultra-Fast Gate Drive

A novel high‐voltage solid‐state switch based on the SiC MOSFET series and its overcurrent protection

15-Kv/40-a FREEDM Supercascode: A Cost-Effective SiC High-Voltage and High-Frequency Power Switch

High Voltage Si/SiC Hybrid Switch: an Ideal Next Step for SiC