Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Ultrastable and Low-Noise Self-Compensation Method for Circuit Thermal Drift of Eddy Current Sensors Based on Analog Multiplier

A Thermal Drift Compensation Method for Precision Sensors Considering Historical Temperature State

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

Ultrastable Eddy Current Displacement Sensor Working in Harsh Temperature Environments with Comprehensive Self-Temperature Compensation

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Temperature Drift Compensation for a High Pressure Eddy Current Displacement Sensor

Ultrastable and highly sensitive eddy current displacement sensor using self-temperature compensation

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

A Stiffness-tunable MEMS Accelerometer with In-operation Drift Compensation

Temperature Drift Analysis and Compensation on Eddy Current Sensor

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

High Temperature Eddy Current Displacement Sensor Based on Temperature Drift Compensation

Design of ultrastable and high resolution eddy-current displacement sensor system

Temperature Drift Compensation of Eddy Current Sensor under High Temperature Environment

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

A Method to Get Perfect Balance Point of Differential Eddy Current Displacement Sensors

Simultaneous Temperature Drift Compensation for Eddy Current Displacement Sensors Used in Magnetically Levitated Rotor

Temperature Compensation of Eddy Current Sensor

A Novel Active Suppression Technology Against Thermal Drift for Ultra-Precision Spherical Capacitive Sensors

A Hybrid Multi-Path CMOS Magnetic Sensor with 76 Ppm/°c Sensitivity Drift.