Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Temperature Drift Compensation for a High Pressure Eddy Current Displacement Sensor

High Temperature Eddy Current Displacement Sensor Based on Temperature Drift Compensation

Novel displacement eddy current sensor with temperature compensation for electrohydraulic valves

Simultaneous Temperature Drift Compensation for Eddy Current Displacement Sensors Used in Magnetically Levitated Rotor

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation

A Differential Compensated Air Coil Current Sensor for Switching Current Measurement of Power Devices.

Improvement Of Temperature Stability Of Eddy Current Sensor

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Research on Automatic Compensation of Remnant-voltage of GMR Eddy Current Probe

Eddy Current Position Measurement in Harsh Environments: A Temperature Compensation and Calibration Approach

A Stiffness-tunable MEMS Accelerometer with In-operation Drift Compensation

Study on a New High-pressure Eddy Current Displacement Sensor

Temperature Compensation for Thermal Anemometers Using Temperature Sensors Independent of Flow Sensors

A simple and effective method to compensate the thermal drift of implantable blood pressure sensors

Temperature Compensation Method of Fluxgate Sensor Based on Polynomial Fitting

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

Temperature Compensation Method for Tunnel Magnetoresistance Micro-Magnetic Sensors Through Reference Magnetic Field

Study of High-Pressure Eddy Current Angle Sensor