Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

A simple and effective method to compensate the thermal drift of implantable blood pressure sensors

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

Studies of a high-sensitive surface acoustic wave sensor for passive wireless blood pressure measurement

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

A novel temperature compensated piezoresistive pressure sensor

Thermal Compensation System for Silicon Piezoresistive Pressure Sensors based on Surface Fitting and Wild Horse Algorithm

Temperature Compensation Method for Piezoresistive Pressure Sensors Based on Gated Recurrent Unit

Mechanical Structure Design of Pressure Sensors with Temperature Self-compensation for Invasive Blood Pressure Monitoring

An Universal packaging technique for low-drift implantable pressure sensors

Accurate Nonlinearity and Temperature Compensation Method for Piezoresistive Pressure Sensors Based on Data Generation.

Wearable anti-temperature interference pressure sensor with ridge-like interlocking microstructures

Temperature Compensation Method Based on Bilinear Interpolation for Downhole High-Temperature Pressure Sensors

Temperature Drift Compensation for a High Pressure Eddy Current Displacement Sensor

Design of MEMS Pressure Sensor Anti-Interference System Based on Filtering and PID Compensation

Temperature Compensation and Pressure Bias Estimation for Piezoresistive Pressure Sensor Based on Machine Learning Approach

Development of Highly Sensitive and Thermostable Microelectromechanical System Pressure Sensor Based on Array-Type Aluminum–Silicon Hybrid Structures

A Comprehensive Compensation Method for Piezoresistive Pressure Sensor Based on Surface Fitting and Improved Grey Wolf Algorithm

Development of MEMS composite sensor with temperature compensation for tire pressure monitoring system

Design and implementation of a kind of high precision temperature compensating system for silicon-on-sapphire pressure sensor

A Resistive Sensor Interface IC with Inductively Coupled Wireless Energy Harvesting and Data Telemetry for Implantable Pressure Sensing.