Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Optimization of Sintering Temperature for SOFCs by a Co-Firing Method

Proton-conducting Solid Oxide Fuel Cells Prepared by a Single Step Co-Firing Process

Quantifying Microstructure Features for High-Performance Solid Oxide Cells

Lowering the Sintering Temperature of Low-Temperature Solid Oxide Fuel Cells with Sm3+ and Nd3+ Co-Doped Ceria Electrolyte

A Novel Co-firing Process for Multi-layers of Solid Oxide Fuel Cells

Spin-coating derived solid oxide fuel cells operated at temperatures of 500 °c and below

High-performance cathode-supported SOFCs prepared by a single-step co-firing process

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Improvement of the Performances of Tubular Solid Oxide Fuel Cells by Optimizing Co-Sintering Temperature of the NiO/YSZ Anode-Ysz Electrolyte Double Layers

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Evaluation of BaZr0.1Ce0.7Y0.2O3−δ-based Proton-Conducting Solid Oxide Fuel Cells Fabricated by a One-Step Co-Firing Process

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

The physical properties and effects of sintering conditions on rSOFC fuel electrodes evaluated by molecular dynamics simulation

Co‐synthesis of Sm0.5Sr0.5CoO3‐Sm0.2Ce0.8O1.9 Composite Cathode with Enhanced Electrochemical Property for Intermediate Temperature SOFCs

Thermosetting polymer templated nanoporous sinter-active layer for low temperature solid oxide fuel cells

High-Performance, Ceria-Based Solid Oxide Fuel Cells Fabricated at Low Temperatures

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method