Abstract:This paper presents a new high speed gate driver circuit driven by In-Zn-O thin film transistors. Two methods are employed to improve the speed of this dirver: First, the input stage multiplex structure is adopted, one input stage drives three output stages; this could reduce the quantity of thin film transistors and also could achieve the narrow bezels in the AMOLED or AMLCD displays. Even the work frequency of the input stage becomes 1/3 of the output stage. When the speed of the circuit increass, there is enough time for input stage charging and discharging. So this kind of driver is suitable for high speed driving method. Second, three times the capacitance coupled effect generated in the gate driver can pull up the voltage level of the key nodes in the circuit, ensuring the signal integrity, While the first time the effect generated in the input stage is to reduce the charge time of the cascade signal and improve the speed of input stage. The second time that generated between input stage and output stage contrbutes to the integrity of cascade ouput signal and output control signal. A diode-connected thin film transistor applied to connect the output control signal and the gate of pull-up thin film transistors in output stage generates the three time capacitance coupled effects. Since the capacitance coupled effect can pull up the gate voltage of the pull-up thin film transistors during output period, the driving ability of the pull-up thin film transistors and the working speed could be promoted effectively. Simulation result shows that the capacitance coupled effect of each key node can pull up the voltage level considerably and the gate driver can normally work at the speed of 4 s. Finally, ten stage gate driver circuits have been fabricated successfully including ten input stages and thirty output stages. The test result shows that the proposed gate driver could work normally with a load of R=5 k and C=100 pF. Furthermore, the high speed test result shows that the output signal pulse width of the circuit is 2 s meeting the driving demands of the 4 k8 k display at the frame rate of 120 Hz. The power consumption of the gate dirver circuit is measured in different resolutions under the frame frequencies of 60 and 120 Hz respectively.

A Metal Oxide TFT Gate Driver with a Single Negative Power Source Employing a Boosting Module

A Low-Power Gate Driver Integrated by IZO-TFTs Employing Single Negative Power Source

A Novel Single Power-Supply IGBT Driver Circuit

Design of High Speed Gate Driver Employing IZO TFTs.

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

An a-InGaZnO TFT Gate Driver Circuit with Positive Feedback Effect

A Highly Stable Biside Gate Driver Integrated by Izo Tfts

A Modified NMOS Inverter with Rail-To-Rail Output Swing and Its Application in the Gate Driver Integrated by Metal Oxide TFTs

P-41: A Low-Power ESL A-Izgo TFT Integrated Gate Driver Circuit

High Speed Gate Driver Circuit Basd on Metal Oxide Thin Film Transistors

A low-power ESL a-IGZO TFT integrated gate driver circuit

P-28: Robust Gate Driver Design with Etching-Stop-Layer Type InGaZnO TFTs Using Stack Buffer Structure

P‐10: Emit Signals Reused Gate Driver Design for Ultra‐Narrow‐Bezel Micro‐LED Display Based on Metal‐Oxide TFTs

Novel Integrated Gate Driver Design Based on A-Igzo TFTs

A Low-Power Scan Driver Employing IZO TFTs Including an AC–DC Type Output Module

A Low Power TG A-Igzo TFT Gate Driver Circuit for AMOLED Display

Nnew In-Zn-O Thin Film Transistors Gate Driver Circuit Employing Input Block Multiplex Structure

P‐2: Narrow Bezel Gate Driver Generating Positive Pulse for AMOLED Display Using LTPO Technology with Depletion Mode Oxide TFTs

A High-Reliability Gate Driver Integrated in Flexible AMOLED Display by IZO TFTs

7‐3: A Low‐Power and High‐Stable TFT Gate Driver with a Novel Bootstrap Scheme

P-5.2: A gate driver circuit with a-IGZO TFTs for a 15-inch AMOLED display