Abstract:This paper presents a new high speed gate driver circuit driven by In-Zn-O thin film transistors. Two methods are employed to improve the speed of this dirver: First, the input stage multiplex structure is adopted, one input stage drives three output stages; this could reduce the quantity of thin film transistors and also could achieve the narrow bezels in the AMOLED or AMLCD displays. Even the work frequency of the input stage becomes 1/3 of the output stage. When the speed of the circuit increass, there is enough time for input stage charging and discharging. So this kind of driver is suitable for high speed driving method. Second, three times the capacitance coupled effect generated in the gate driver can pull up the voltage level of the key nodes in the circuit, ensuring the signal integrity, While the first time the effect generated in the input stage is to reduce the charge time of the cascade signal and improve the speed of input stage. The second time that generated between input stage and output stage contrbutes to the integrity of cascade ouput signal and output control signal. A diode-connected thin film transistor applied to connect the output control signal and the gate of pull-up thin film transistors in output stage generates the three time capacitance coupled effects. Since the capacitance coupled effect can pull up the gate voltage of the pull-up thin film transistors during output period, the driving ability of the pull-up thin film transistors and the working speed could be promoted effectively. Simulation result shows that the capacitance coupled effect of each key node can pull up the voltage level considerably and the gate driver can normally work at the speed of 4 s. Finally, ten stage gate driver circuits have been fabricated successfully including ten input stages and thirty output stages. The test result shows that the proposed gate driver could work normally with a load of R=5 k and C=100 pF. Furthermore, the high speed test result shows that the output signal pulse width of the circuit is 2 s meeting the driving demands of the 4 k8 k display at the frame rate of 120 Hz. The power consumption of the gate dirver circuit is measured in different resolutions under the frame frequencies of 60 and 120 Hz respectively.

A Low-Power Scan Driver Employing IZO TFTs Including an AC–DC Type Output Module

Low-Power Bi-Side Scan Driver Integrated by IZO TFTs Including a Clock-Controlled Inverter

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

A Scan Driver Including Light Emission Control Integrated by Metal-Oxide Thin-Film Transistors

Adaptive frequency driving scan driver based on a‐InGaZnO TFTs for extremely low‐power displays

Design of a Scan Driver IC for Plasma Display Panel

Research and Implementation Process of a 42" PDP Scan Driver IC"

Design of High Speed Gate Driver Employing IZO TFTs.

A Low-Power Gate Driver Integrated by IZO-TFTs Employing Single Negative Power Source

A low-power ESL a-IGZO TFT integrated gate driver circuit

A Highly Stable Biside Gate Driver Integrated by Izo Tfts

A low-power metal–oxide scan driver circuit outputting non-overlapping pulses with DC power-supplied buffer

A Low Power TG A-Igzo TFT Gate Driver Circuit for AMOLED Display

A Metal Oxide TFT Gate Driver with a Single Negative Power Source Employing a Boosting Module

A Simple Scan Driver Circuit Suitable for Depletion-Mode Metal-Oxide Thin-Film Transistors in Active-Matrix Displays

A High-Reliability Scan Driver Integrated Circuit by MO TFTs for a Foldable Display

A High-Reliability Gate Driver Integrated in Flexible AMOLED Display by IZO TFTs

A Compact Bi-Direction Scannable A-Si:H TFT Gate Driver

High Speed Gate Driver Circuit Basd on Metal Oxide Thin Film Transistors

P‐10: Emit Signals Reused Gate Driver Design for Ultra‐Narrow‐Bezel Micro‐LED Display Based on Metal‐Oxide TFTs

Nnew In-Zn-O Thin Film Transistors Gate Driver Circuit Employing Input Block Multiplex Structure