Abstract:Nonuniform temperature fields in steam cracking furnaces caused by geometry factors such as burner positions, shadow effects, and asymmetry of the reactor coil layout are detrimental for product yields and run lengths. The techniques of adjusting burner firing (zone firing) and feedstock mass flow rate (pass balancing) have been practiced industrially to mitigate these effects but could only reduce the nonuniformities between the so‐called modules (a group of many coils). An extension of the pass balancing methodology is presented to further minimize the intra‐module nonuniformities, that is, variation between the coils within a module, in floor fired furnaces. Coupled furnace‐reactor computational fluid dynamics‐based simulations of an industrial ultraselective conversion (USC) furnace were performed to evaluate four different feedstock flow distribution schemes, realizing equal values for coil outlet temperature, propene/ethene mass ratio, maximum coking rate and maximum tube metal temperature (TMT), respectively, over all the reactor coils. It is shown that feedstock flow distribution creates a larger operating window and extends the run length. Out of the four cases, the coking rate as criterion leads to the highest yearly production capacity for ethene and propene. Uniform maximum coking rates boost the annual production capacity of the USC furnace with a nameplate ethene capacity of 130 103 metric tons per year with 1000 metric tons for ethene and 730 metric tons for propene. For industrial application, achieving uniform maximum TMT is more practical due to its measurability by advanced laser‐based techniques. Most steam cracking furnaces can be retrofitted by optimizing the dimensions of venturi nozzles that regulate the feedstock flow to the coils. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3199–3213, 2017

Turbulent Mixing Enhancement of Thermal Cracking Coil by Hollow Cross Disk Internal

Computational fluid dynamics assisted design of cracking coils

Numerical Studies on Heat Transfer Enhancement by Hollow-Cross Disk for Cracking Coils

Novel Cracking Coil Design Based on Positive Constructing of Synergetic Flowing Field

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Cfd Simulation Of Cracking Tube With Internal Twisted Slices

Numerical Investigation of Turbulent Reactive Mixing in a Novel Coaxial Jet Static Mixer

Computational Fluid Dynamics‐based Steam Cracking Furnace Optimization Using Feedstock Flow Distribution

Comprehensive Cfd Simulation of Product Yields and Coking Rates for A Floor- and Wall-Fired Naphtha Cracking Furnace

HEAVY OIL DEEP CATALYTIC CRACKING PROCESS IN DOWNER REACTOR TO PRODUCE LIGHT OLEFINS

Parametric Analysis on the Thermal Behavior of Cracking Hydrocarbon Fuel Flow Inside Asymmetry Heated Cooling Channels with Micro-Ribs

CFD Simulation of Propane Cracking Tube Using Detailed Radical Kinetic Mechanism

Transverse mixing characteristics of single-phase flow in the helical cruciform fuel assembly

Study on co-cracking performance of different hydrocarbon mixture in a steam pyrolysis furnace

Thermal Cracking and Catalytic Cracking of the Mixing Endothermic Hydrocarbon Fuel

Coupling ReaxFF molecular dynamics with computational fluid dynamics on the enhanced heat sink of n-decane decomposition initiated by nitroethane in the regenerative cooling channels

Three-dimensional CFD model for the coking of supercritical n-decane in circular and elliptical tubes

Intensification of High-Flux Fischer-Tropsch Synthesis with Axial Gradient Co-loading FeCrAl Monolith Catalysts

Influence of key geometry parameters on heat transfer and flow resistance properties of toothed internal spiral piece cracking furnace tube

Numerical Investigation of Transverse Flow and Turbulent Mixing in a Helical Cruciform Fuel Bundle

Study on the synergistic effect of electromagnetic stirring and mechanical reduction on the improvement of the internal homogeneity of high-carbon steel billet