Abstract:Helical coils have gained increasingly interest in the field of supercritical carbon dioxide (SCCO2) Rankine cycles during the last decade due to the compact structure and high heat transfer rate. Past studies mainly focused on effects of operating conditions and the gravitational buoyancy, and are not sufficient to fully understand the behavior of SCCO2 helically coiled gas heaters. Influence of some other key factors, such as the coil orientations and internal wall roughness, on overall performance has been seldom reported and is still unclear to date. In this work we filled this gap with a solid-to-fluid conjugate heat transfer model where supercritical flow turbulence is solved by the Shear-Stress Transport k-ω equations. The orientation effect on performance of helical coils was revealed with the coil axis arranged in horizontal, vertically upward and downward directions, respectively. Results demonstrate that the criterion of Bo < 10−5 for negligible buoyancy effect was applicable to coils with dimensionless curvature δ = 0.01–0.1. The Orientation effect only emerged when the buoyancy effect became significant with Bo > 10−5. Deterioration and enhancement of heat transfer occurred alternatively in horizontal coils. The overall performance of horizontal coils was much worse than vertical coils, among which the downward orientation was slightly better than the upward one. The increase of δ barely improved the performance of horizontal coils. Instead, at larger δ the intensive fluctuation in heat transfer coefficients was more frequent due to the more drastic change of the flow direction. The location and extent of local impairment also varied with the inlet arrangement. Finally, the passive compound enhancement technique of helical coils in conjunction with internal helical-rib roughness was found to be very effective in mixed convection of SCCO2, especially in the horizontal coils.

Computational fluid dynamics assisted design of cracking coils

Turbulent Mixing Enhancement of Thermal Cracking Coil by Hollow Cross Disk Internal

Novel Cracking Coil Design Based on Positive Constructing of Synergetic Flowing Field

Numerical Studies on Heat Transfer Enhancement by Hollow-Cross Disk for Cracking Coils

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Cfd Simulation Of Cracking Tube With Internal Twisted Slices

Computational Fluid Dynamics‐based Steam Cracking Furnace Optimization Using Feedstock Flow Distribution

CFD Modeling of Phase Change and Coke Formation in Petroleum Refining Heaters

Coupling phase-field model and CFD for hot cracking predictions of Al-Li alloys

Orientation Effect in Helical Coils with Smooth and Rib-Roughened Wall: Toward Improved Gas Heaters for Supercritical Carbon Dioxide Rankine Cycles

Three-dimensional CFD model for the coking of supercritical n-decane in circular and elliptical tubes

Comprehensive Simulation and Optimization of an Ethylene Dichloride Cracker Based on the One-Dimensional Lobo–Evans Method and Computational Fluid Dynamics

A CFD Study on Intergranular Liquid Feeding and Cracking During Solidification in Welding

Numerical simulation on flow, combustion and heat transfer of ethylene cracking furnaces

Single-phase Flow in Helical Cruciform Fuel Assembly with Conjugate Heat Transfer

Coupling ReaxFF molecular dynamics with computational fluid dynamics on the enhanced heat sink of n-decane decomposition initiated by nitroethane in the regenerative cooling channels

Predicting solidification cracking in directed energy deposition of Hastelloy X alloys based on thermal-mechanical model

Zone Method Based Coupled Simulation of Industrial Steam Cracking Furnaces

Fluid Dynamic Numerical Simulation Coupled With Heat Transfer And Reaction In The Tubular Reactor Of Industrial Cracking Furnaces

HEAVY OIL DEEP CATALYTIC CRACKING PROCESS IN DOWNER REACTOR TO PRODUCE LIGHT OLEFINS

CFD Investigation on Thermal-Hydraulic Characteristics of a Helical Cruciform Fuel Bundle